模具(MOULD/MOLD,TOOL):
CAVITY:前模
CORE:后模(定模)
DIMENSION:寸法
GATE:浇口/水口/入水口
PIN GATE:点水口/点浇入水
SIDE GATE:边水口/侧浇入水/大水口APPERANCE SURFACE:体裁面WARPAGE DIRECTION:变形方向
DRAFT ANGEL:脱模斜度
PARTING LINE/P。L:分模线
EJECT PIN/E。P:注塑顶针
BLAST/TEXTURE:喷啥,蚀纹
MIRROR FINISH:镜面(抛光)处理POLISH:抛光
EMD:放电加工
WELD:熔接加工(烧焊)
LATHE:车床
MILLING CUTTER:铣刀
MILLING MACHINE:铣床
WIRE CUT:线切割
CNC:主加工中心
POWER DRILL:电钻
DRILLING:钻孔
FRITING:烧结
ANNEALING:淬火
注塑术语(INJECTION)
SCREW:螺杆
WELD LINE:熔接线
SINK MARK:缩水
DRAG MARK:脱花
BURR:批锋
FLOW MARK:流纹
SHADOW MARK/GLOSS DIFFERENCE:光影SHORT:缺胶
INJECTION CYCLE:成型周期
注塑英语
型厚大小
Thick size
锁模结构(机绞/直压)
Mode locking structure(machine twists/straight pressure)
最大开模距离
The biggest die sinking is away from
动模板最大模具重量
Moves the template maximum mold weight
哥林柱间距
Elder brother forest column spacing
顶出形式(电动五点,油压五点,油压十三点)
Goes against the form (electrically operated five spots, flowing tubing head pressure five spots, flowing tubing head pressure 13 spots)
顶出长度
Goes against the length
顶棍孔直径
Goes against the stick hole diameter
顶棍孔中心矩
Goes against the stick hole central moment
螺杆材质(合金)
Screw rod material quality (alloy)
螺杆转速
Screw rod rotational speed
最大射出体积
Projects the volume most greatly
最大射出量
Projects the quantity most greatly
射出率
Ejection rate
每10mm射出量(理论)
Each 10mm projects the quantity (theory)
射咀直径
Shoots ju the diameter
射咀R值
Shoots ju the R value
射咀空径
Shoots ju the spatial diameter
定位环直径
Locating ring diameter
溶胶能力
Sol ability
驱动方式(全自动/全液压)
Drive type (completely automatic/entire hydraulic pressure)
电压
Voltage
电热功率
Electric heating power
电机功率
Electrical machinery power
作动油量
Does moves the oil mass
机械尺寸
Mechanical size
机械重量
Mechanical weight
最高溶胶温度
Highest sol temperature
是否带中子
Whether to bring the neutron
是否带吹气
Whether to have the air flus
开模行程,open ould stroke定产,order production定产效率,efficiency of order prod uction注胶切换点,glue-injection switching point保压压力1,protective pressure倒索,inverse sling模保护,mould protection关模低压,close mould low pressure炮筒温度,gun barrel temperature回料量,returning amount注射压力,injecting pressure色母配比,raw color ratio mixing配套摸具,matched mold顶针次数,thimble times立式注胶机vertical injector工艺卡,WSP(work specification procedure)工作指导work instr uction
注塑机部分英语
钣金machine cover / upper cover/ side cover
锁模部分clamping unit
射胶部分injection unit
机架machine frame / base
电气系统electric system
液压系统hydraulic system
机械系统mechanical system
机门safety door / fixed door / movable door
锁模部分clamping unit
电脑控制器computer controller
机械安全锁mechanical safety interlock
射胶部分injection unit
液压系统hydraulic system
电箱electrical cabinet / cable
机架分体线stand split line
机架螺丝孔foundation bolt hole
机架machine base / supporting frame
理论注射容积theoretical shot volume
实际注射量shot weight
螺杆直径screw diameter
注射压力injection pressure
注射速度injection speed
注射速率injection rate
螺杆长径比screw L/D ratio
螺杆行程screw stroke
螺杆转速screw speed
熔胶能力plasticizing capacity
锁模力clamping force
开模/锁模行程mold clamping / opening stroke
模板尺寸platen size
拉杆间距distance between tie bars / rods
模板最大距离max. daylight
容模量mold thickness (min. & max.)
顶出行程hydraulic ejection stroke
顶出力hydraulic ejection force
顶针数nos. of ejector pin
液压系统压力hydraulic system pressure
油泵马达pump motor
电热量heating capacity
温度控制区数nos. of temp control zones
射嘴接触力nozzle contact force
Injection 注射
Mould closing 关模
Cooling time冷却时间
Holding time 保压时间
Injection start delay 注射延迟
Injection alarm time注射报警时间
Final cushion minimum value最后段位置
Change-over to holding by value切换到锁模Plasticizing end value预塑重终点
Hydrarlic change-over pressure holding切换到保压Screwvalue for change-over to holding加料Hydraulic pressure in holding锁模力
Filling stage pressure limit充模压力
Injection speed注射速度
Plasticizing delay预塑延时
1st suck-back speed储料一速度
1st suck-back pressure储料一压力
Screwrotation speed螺杆转速
Decompression value at end of injection注射终点Decompression value at end of plasticizing预塑终点Mould close force关模压力
Mould closing safety time .. 时间
Mould closing pressure .. 压力
1st closing safety stage pressure 合模一段压力
1st mould closing speed ...成型速度
1st stage mould closing safety position.....位置
High pressure start position高压锁模位置
注塑专业英语
Surface Appearance
外观
Glossiness/gloss finish
光洁度
Matt finish/matt surface
毛面
Glass fiber rich surface/glass emergence on the surface 玻纤外露
Blooming/surface blooming
表面析出
White patches on surface
表面白斑
Silver marks/silver streak
银纹
Splay mark
水纹
Flow mark
流纹
Weld line
溶结纹
Brittle/brittleness
脆
Bubbles/trapped gas
气泡
Void
孔
Burn marks
烧伤
FR failed
阻燃不合格
Flame rating V-2
阻燃V-2
Poor dispersion
分散不好
FR/PTFE …agglomerates etc 阻燃剂/PTFE…结块
Pellet porous
粒子不密/蜜蜂窝
Low impact/tensile etc
物理性能低
High flow/filler content etc
流动性/填充…过高
Longs/fines/doubles
长粒/碎屑/连粒
Poor cut
粒形不好
Bristle/voids
表面有小气泡/孔
Glass bundles
玻纤结团
Product was rejected due to 产品不能接受因为…
High moisture level
高水分
Warpage/warped
翘曲
Shrinkage/shrink
收缩
Sink marks
缩影
Short shot/short molding
打不满
Distortion
变形
Over dimension
尺寸过大
Under dimension
尺寸过小
Flashing
飞边
Discoloration
变色
Off color
颜色差异
Flow rate
流动率
Viscous
粘
High flow
高流动
Low flow
低流动
Sticky
粘
Mold release
脱模
Antioxidant
抗氧剂
Flame retardant agent
阻燃剂
Heat stabilizer
热稳定剂
Chopped glass fiber
短切玻纤
Roving glass fiber
粗纱/长玻纤
Glass beads
玻璃微珠
Milled fiber
碾磨纤
Molybdenum disulfide/moly/MoS2 二硫化钼
Colorant
着色剂
Pigment
颜料
Dye
染料
Accepted product specification
接受产品规格
Approved our product
认可我们的产品
Re-set spec
重新定标准
Add in e xtra …
添加多一点…
Reduced … content
减少…含量
Dropped/reduced … by x%
减少…含量…%
Confirmed color standard
确认颜色标准
Approved color standard
认可颜色标准
Re-confirmed color standard
重新确认颜色标准
Qualified our product
认可我们的产品
Undergoing heat aging test
在做热老化实验
Product is under testing
产品在测试当中
Received first order
接了第一个定单
Expected to finish by …
预计在…完成
Expected order is xMT
预计定单量…吨
Estimated annual/monthly consumption
预计年/月用量
--- 详细信息
1. 注射模具名称
注射模:Injection mould
热塑性塑料注射模:Injection mould for thermoplasctics 热固性塑料注射模:Injection mould for thermosets
无流道模:Runerless mould
热流道模:Hot runner mould
绝热流道模:Insulated
温流道模:Warm runner mould
2. 浇注,排溢,分型
浇注系统:Feed system
主流道:Sprue
分流道:Runner
浇口:Gate
直接浇口:Direct gate ;Sprue gate
环行浇口:Ring gate
盘型浇口:Disk gate ;Diaphragm
轮辐浇口:Spoke gate :Spider gate
点浇口:Pin-point gate
侧浇口:Edge gate
潜伏浇口:Submarine gate
护耳浇口:Tab gate
扇型浇口:Fan gate 牛角浇口:Horn gate
冷料穴:Cold-slug well
浇口套:Sprue bush ;Sprue bushing
浇口镶块:Gating insret
分流锥:Sprader
流道板:Runner plate
热流道板:Manifold block;Hot-runner manifold
温流道板:Warm runner plate
二级喷嘴:Secondary nozzle
鱼雷形组合体:Torpedo;Torpedo body assembly
管式加热器:Cartridge heater
热管:Heat pipe
阀式浇口:Valve gate
加热腔:Loading chamber
柱塞:Force plunger;Pot plungr
溢料槽:Flash grorve ;Spew grovve
排气槽:Vent
分型面:Parting line
水平分型面:Horizontal parting half
垂直分型面:Vertical parting half
3. 成型零件
定模:Stationary mould:Fixed half
动模;Movable mould ;Moving half
上模:Upper mould;Upper half
下模:Lower mould :Lower half
型腔:Cavity
凹模:Impression;Cavity plate
镶件:Mould insert
活动镶件:Movable insert;Lose detail
拼块:Splits
凹模拼块:Cavity splits
型芯拼块:Core splits
型芯:Core
侧型芯:Side core:slide core
螺纹型芯:Thread plug;Threaded core
螺纹型环:Thread ring;Threaded cavity
凸模:Punch;Force
嵌件:Insert for mould
4. 支持与固定零件
定模座板:Fixed clamp plate:Top clamping plate;Top plate
动模座板:Moving clamp plate :Bottom clamping plate; Bottm plate 上模座板:Upper clamping plate
下模座板:Lower clamping plate
凹模固定板:Cavity-retaier plate
型芯固定板:Core-retaier plate
凸模固定板:Punch-retaier pilte
模套:Chase ;Bolster;Frame;
支撑板:Backing plate
垫块:Spacer parallel
支架:Ejector housing
支撑柱:Support pillar
模板:Mould plate
5. 抽芯零件
斜销:Angle pin; Finger cam
滑块:Slide;Cam slide
侧型芯滑块:Slide core-slide
滑块导板:Slide guide strip
锲紧块:Heel block;Wedge block;Locking heel
斜槽导板:Finger guide plate
弯销:Dog-leg cam
斜滑块:Angled-lift splits
6. 导向零件
导柱:Guide pillar;Guide pin;Leader pin
带头导柱:Guide pillar ;Straight leader pin
带肩导柱:Guide pillar Shouldered;Shoulder leader pin
推板导柱:Ejector guide pillar;Ejeector guide pin
导套:Guide bush ;Guide bushing
直导套:Guide bush ;Straight ;Straight bushing
带头导套:Guide bush ;Shoulder bushing
推板导套:Ejector guide bush;Ejector bushing
7. 定位和限位零件
定位圈:Locating ring
锥形定位圈:Mould bases locating elements
复位杆:Ejector plate return pin;Push-back pin
限位钉:Stop pin;Stop button
限位块:Stop block ;Stop pad
定距拉杆:Length bolt;Puller bolt
定距拉板:Puller plate;Limit plate
8. 推出零件
推杆:Ejector pin
圆柱头推杆:Ejector pin with cytindrical head
带肩推杆:Shouldered ejector pin
扁推杆:Flar ejector pin
推管:Ejector sleeve
推块:Ejector pad
推件板:Stripper plate
推件环:Stripper ring;Stripper dlisk
推杆固定板:Ejector retainer plate
推板:Ejector plate;Ejection plate连接推杆:Ejector tie rod 拉料杆:Sprue puller
钩形垃料杆:Sprue puller ;Z-shaped
球头垃料杆:Sprue puller;Ball headed
圆锥头垃料杆:Sprue puller;Conical headed
分流道垃料杆:Runner puller;Runner lock pin
推流道板:Runner stripper plate
9. 冷却和加热零件
冷却通道:Cooling channel;Cooling line
隔板:Baffle
加热板:Heating plate
隔热板:Thermal insulation board
10. 模架
模架:Mould base
标准模架:Standard mould base
11. 塑料成型模具的主要设计要素
注射能力:Shot capacity
收缩率:Shrinkage
注射压力:Injection pressure
锁模力:Clamping force ;Locking force
成型压力:Moulding pressure
模内压力:Internal mould pressure;Cavity pressure 开模力:Mould opening force
脱模力:Ejection force
抽芯力:Core-pulling force
抽芯距:Core-pulling distance
闭合高度:Mould shut height
最大开距:Maximum daylight;Open daylight
投影面积:Projected area
脱模斜度:Draft
脱模距:Stripper distance
模芯 Parting Core 耐落胶 Teflon Paste 局部视图 Partial View 偏移量 Offset 冷料 Cold Slag 水塞 Water Line Plug 线切割 Wire 撬模脚 Ppy Slot 轮廓 Contour 重新加工 Reworked 螺纹孔Tapping Hole 配件 Components 连接件 Fittings 补偿 Compensation 斜针 Angle Pin 平面度 Parallel 接合 Engage 倒角Chamfer 替换镶件Interchangeable Mold Inserts 模胚 Mold Base 指定吨位的注塑机 Specific Press 热嘴Hotnozzle 水嘴接头 Water Fitting 火花机 Edm 螺纹 Eyebolt Thread 熔接线 Weildline 回针 Stop Pin 压机 Press 二级顶出针 Sub-Leaderd Pin 嗮纹 Texturing 镶件 Mold Insert 梯形 Trapezoid
加硬 Harden 凸缘、法兰 Flange 唧嘴 Sprue 方铁 Spacer Block 设计筒图 Design Preliminary 顶针板 Ejector Plate 名称块表 Title Block 顶针底板 Ejector Retainer Plate 版本标识 Revision Level 垫板 Retainer Plate 材料清单 Stock List 后模镶针 Core Pin 制模 Build Mold 垃圾钉 Stop Pin 手动滑块 Hand Slide 有托顶针 Shoulder Ejector Pin 漏水测试 Leak Test 顶针板导套Guided Ejection Bushing 流道排气 Runner Vents 针板导柱 Guided Ejection Leader Pin 抛光 Draw Polish 唧嘴 Sprue Bushing 侧抽芯 Slide Action 三板模延伸式唧嘴 Extension Noozzle Bulishing 加强筋 Reinforcing 水口板导套 Runner Stripper Pin 三角撑 Gusset 定位圈(法兰)Locating Ring 柱子 Bossed 管钉(定位销)Dowel Pin 出模斜度 Draft 管状管钉 Tubular Dowel
Counter bored hole 沉孔 Chamfer 倒斜角 Fillet 倒圆角 padding block垫块 stepping bar垫条 upper die base上模座 lower die base下模座 upper supporting blank上承板 upper padding plate blank上垫板 spare dies模具备品 spring 弹簧 bolt螺栓 document folder活页夹 file folder资料夹 to put file in order整理资料 spare tools location手工备品仓 first count初盘人 first check初盘复棹人 second count 复盘人 second check复盘复核人 equipment设备 waste materials废料 work in progress product在制品 casing = containerization装箱 quantity of physical inventory second count 复盘点数量 Quantity of customs count 会计师盘,点数量 the first page第一联 filed by accounting department for reference会计部存查 end-user/using unit(department)使用单位 Summary of year-end physical inventory bills 年终盘点截止单据汇总表 bill name单据名称 This sheet and physical inventory list will be sent to accounting department together (Those of NHK will be sent to financial department) 本表请与盘点清册一起送会计部-(NHK厂区送财会部) Application status records of year-end physical inventory List and physical inventory card 年终盘点卡与清册使用-状况明细表 blank and waste sheet NO. 空白与作废单号
PCB专业术语(英语) PCB printed circuit board 印刷电路板,指空的线路板 PCBA printed circuit board assembly 印刷电路板组件,指完成元件焊接的线路板组件 PWA Printed Wire Assembly, Aperture list Editor:光圈表编辑器。 Aperture list windows:光圈表窗口。 Annular ring:焊环。 Array:拼版或陈列。 Acid trip:蚀刻死角。 Assemby:安装。 Bare Bxnel:光板,未进行插件工序的PCB板。 Bad Badsize:工作台,工作台有效尺寸。 Blind Buried via:盲孔,埋孔。 Chamfer:倒角。 Circuit:线路。 Circuit layer:线路层。 Clamshell tester:双面测试机。 Coordinates Area:坐标区域。 Copy-protect key:软件狗。 Coutour:轮廓。 Draw:一种圆形的光圈,但只是用于创建线路,不用于创建焊盘。
Drill Rack:铅头表。 Drill Rack Editor:铅头表编辑器。 Drill Rack window:铅头表窗口。 D Code:Gerber格式中用不着于表达光圈的代码。 Double-sided Biard:双面板。 End of Block character(EOB):块结束符。 Extract Netlist:提取网络。 Firdacial:对位标记。 Flash:焊盘,来源于早期矢量光绘机,在矢量光绘机中,焊盘是光通过光圈“闪出”(Flash)而形成的。 Gerber Data:从PCB CAD系统到PCB生产过程中最常用的数据格式。Grid :栅格。 Graphical Editor:图形编辑器。 Incremental Data:增量数据。 Land:接地层。 Layer list window:层列表窗口。 Layer setup Area:层设置窗口。 Multilayer Board:多层板。 Nets:网络。 Net End:网络端点。 Net List:网络表。 Pad:焊盘。 Pad shaving:焊盘缩小。
汽车制造专业英语词汇 大全 Document serial number【KKGB-LBS98YT-BS8CB-BSUT-BST108】
汽车专业词汇 Assembly line组装线 Layout布置图Conveyer流水线物料板 Rivet table拉钉机 Rivet gun拉钉枪Screw driver起子Electric screw driver电动起子Pneumatic screw driver气动起子worktable 工作桌OOBA开箱检查 fit together组装在一起 fasten锁紧(螺丝) fixture 夹具(治具) pallet栈板barcode条码barcode scanner 条码扫描器 fuse together熔合 fuse machine热熔机repair修理 operator作业员 QC品管 supervisor 课长 ME制造工程师 MT制造生技 cosmetic inspect 外观检查 inner parts inspect内部检查 thumb screw大头 螺丝 lbs. inch镑、英 寸 EMI gasket导电条 front plate前板 rear plate 后板 chassis 基座 bezel panel面板 power button电源 按键 reset button重置 键 Hi-pot test of SPS高源高压测试 Voltage switch of SPS 电源电压接拉键 sheet metal parts 冲件 plastic parts塑 胶件 material check list物料检查表 work cell工作间 trolley台车 carton纸箱 sub-line支线 personnel resource department 人力资源部 production department生产部 门 planning department企划部 QC Section品管科 stamping factory 冲压厂 painting factory 烤漆厂 molding factory 成型厂 common equipment 常用设备 uncoiler and straightener整平 机 punching machine 冲床 gripper机械手 hydraulic machine油压机 lathe车床 planer |'plein| 刨床 miller铣床 grinder磨床 linear cutting线 切割 electrical sparkle电火花 welder电焊机 staker=reviting machine铆合机 position职务 president董事长 general manager 总经理 special assistant manager特助 factory director 厂长 department director部长
冲压模具词汇 Counter bored hole 沉孔 Chamfer 倒斜角 Fillet 倒圆角 padding block垫块 stepping bar垫条 upper die base上模座 lower die base下模座 upper supporting blank上承板 upper padding plate blank上垫板 spare dies模具备品 spring 弹簧 bolt螺栓 document folder活页夹 file folder资料夹 to put file in order整理资料 spare tools location手工备品仓 first count初盘人 first check初盘复棹人 second count 复盘人 second check复盘复核人 equipment设备 waste materials废料 work in progress product在制品 casing = containerization装箱 quantity of physical inventory second count 复盘点数量 Quantity of customs count 会计师盘,点数量 the first page第一联 filed by accounting department for reference会计部存查 end-user/using unit(department)使用单位 Summary of year-end physical inventory bills 年终盘点截止单据汇总表 bill name单据名称 This sheet and physical inventory list will be sent to accounting department together (Those of NHK will be sent to financial department) 本表请与盘点清册一起送会计部-(NHK厂区送财会部) Application status records of year-end physical inventory List and physical inventory card 年终盘点卡与清册使用-状况明细表
Chapter One Mechanics Components 第一章机械构件 Lesson One 第一课齿轮 Words and Expressions 1.spur gear 直齿轮 2.thermal expansion 热膨胀 3.lubrication 润滑 4.backlash 倾向间隙 5.the pitch circles 节圆 6.space width 间隙宽度 7.instrument gear 仪表齿轮 8.the split gear 拼合齿轮 9.helical gear 斜齿轮 10.p itch-line velocities 节线速度 11.a n axial thrust 轴向推力 12.b lank 坯件 13.d ouble-helical gears 人字齿轮 14.n on-intersecting 不相交的 15.w orm gears 蜗轮蜗杆 16.b evel gears 伞齿轮 17.c rossed-axis 交叉轴 18.n ut 螺母 19.s crew 丝杠, 螺钉 20.l arge rations 大速比 21.p arallel-shaft gears 平行轴齿轮 22.s ingle-thread worms 单线蜗杆
23.l ead angles 导角 24.m ultiple-thread worms 多线蜗杆 25.h ypoid gear 偏轴伞齿轮 26.r olling Cones 滚锥 27.i nvolutes 渐开线 Lesson Two Rolling Guides and Bearings 第二课滚动导轨和轴承 Words and Expressions 1.rolling guides (rolling guideways) 滚动导轨 2.plain guides 普通导轨 3.a roller chain 滚柱链 4.cape 保持架 5.guide surfaces 导轨面 6.stiffness 刚性 7.load-carrying capacity 载荷能力 8.rolling-contact bearings 滚动轴承 9.ball bearing 球轴承 10.a n inner race 内座圈 11.a n outer race 外座圈 12.s eparator 隔离环 13.c urvature 曲率 14.n otch 凹槽 15.t hrust load 推力负载 16.a radial ball bearing 经向球轴承 17.s ections 断面
附件1:外文资料翻译译文 冲压模具设计 对于汽车行业与电子行业,各种各样的板料零件都是有各种不同的成型工艺所生产出来的,这些均可以列入一般种类“板料成形”的范畴。板料成形(也称为冲压或压力成形)经常在厂区面积非常大的公司中进行。 如果自己没有去这些大公司访问,没有站在巨大的机器旁,没有感受到地面的震颤,没有看巨大型的机器人的手臂吧零件从一个机器移动到另一个机器,那么厂区的范围与价值真是难以想象的。当然,一盘录像带或一部电视专题片不能反映出汽车冲压流水线的宏大规模。站在这样的流水线旁观看的另一个因素是观看大量的汽车板类零件被进行不同类型的板料成形加工。落料是简单的剪切完成的,然后进行不同类型的加工,诸如:弯曲、拉深、拉延、切断、剪切等,每一种情况均要求特殊的、专门的模具。 而且还有大量后续的加工工艺,在每一种情况下,均可以通过诸如拉深、拉延与弯曲等工艺不同的成形方法得到所希望的得到的形状。根据板料平面的各种各样的受应力状态的小板单元体所可以考虑到的变形情形描述三种成形,原理图1描述的是一个简单的从圆坯料拉深成一个圆柱水杯的成形过程。 图1 板料成形一个简单的水杯
拉深是从凸缘型坯料考虑的,即通过模具上冲头的向下作用使材料被水平拉深。一个凸缘板料上的单元体在半径方向上被限定,而板厚保持几乎不变。板料成形的原理如图2所示。 拉延通常是用来描述在板料平面上的两个互相垂直的方向被拉长的板料的单元体的变形原理的术语。拉延的一种特殊形式,可以在大多数成形加工中遇到,即平面张力拉延。在这种情况下,一个板料的单元体仅在一个方向上进行拉延,在拉长的方向上宽度没有发生变化,但是在厚度上有明确的变化,即变薄。 图2 板料成形原理 弯曲时当板料经过冲模,即冲头半径加工成形时所观察到的变形原理,因此在定向的方向上受到改变,这种变形式一个平面张力拉长与收缩的典型实例。 在一个压力机冲程中用于在一块板料上冲出一个或多个孔的一个完整的冲压模具可以归类即制造商标准化为一个单工序冲孔模具,如图3所示。
【常用软件】SPSS术语中英文对照
SPSS的统计分析过程均包含在Analysis菜单中。我们只学以下两大分析过程:Descriptive Statistics(描述性统计)和Multiple Response(多选项分析)。Descriptive Statistics(描述性统计)包含的分析功能: 1.Frequencies 过程:主要用于统计指定变量各变量值的频次(Frequency)、百分比(Percent)。 2.Descriptives过程:主要用于计算指定变量的均值(Mean)、标准差(Std. Deviation)。 3.Crosstabs 过程:主要用于两个或两个以上变量的交叉分类。 Multiple Response(多选项分析)的分析功能: 1.Define Set过程:该过程定义一个由多选项组成的多响应变量。 2.Frequencies过程:该过程对定义的多响应变量提供一个频数表。 3.Crosstabs过程:该过程提供所定义的多响应变量与其他变量的交叉分类表。
Absolute deviation, 绝对离差 Absolute number, 绝对数 Absolute residuals, 绝对残差 Acceleration array, 加速度立体阵 Acceleration in an arbitrary direction, 任意方向上的加速度Acceleration normal, 法向加速度 Acceleration space dimension, 加速度空间的维数Acceleration tangential, 切向加速度 Acceleration vector, 加速度向量 Acceptable hypothesis, 可接受假设 Accumulation, 累积 Accuracy, 准确度 Actual frequency, 实际频数 Adaptive estimator, 自适应估计量 Addition, 相加 Addition theorem, 加法定理 Additivity, 可加性 Adjusted rate, 调整率 Adjusted value, 校正值 Admissible error, 容许误差 Aggregation, 聚集性 Alternative hypothesis, 备择假设 Among groups, 组间 Amounts, 总量 Analysis of correlation, 相关分析 Analysis of covariance, 协方差分析 Analysis of regression, 回归分析 Analysis of time series, 时间序列分析
制造业常用英语词汇 制造业常用英语词汇--强烈推荐!!! 一、部门及职位名称 总经理办公室General manager’s office 模具部Tooling department 项目部Project department 品质部Quality department 计划部Plan department 制造部Manufacture department Keypad产品部Keypad department IMD 产品部IMD department 五金部Metal stamping department 设计科Design section 冲压车间Stamping workshop 电镀车间Plating workshop 物控科Production material control section 计划科Plan section 仓务科Warehouse section 商务科Business section 品质规划科quality plan section IQC科IQC section IPQC科IPQC section
OQC科OQC section 检测中心measurement center 项目规划科Project plan section 项目XX科Project section XX 试模科Mold test section 成本科Cost section 设备科Facility section 采购科Purchase section 综合办General affairs office 编程科Programming section 模具工程科Tooling engineering section 模具装配车间Mold assembly workshop 文控中心Document control center (DCC) 注塑车间Injection workshop 喷涂车间Spray painting workshop 装配车间Assembly workshop 总经理General manager (GM) 经理manager XX部门经理Manager of XX department 原料库Raw material warehouse 半成品库Semi-finished product warehouse 成品库Finished product warehouse
市场研究行业词汇英语翻译 《财富》杂志 Fortune 案头调研 Desk Research 奥美公司 Ogilvy & Mather 白色商品 White Goods 百乐门 Parliament 百威啤酒 Budweiser 包裹销售法 Banded Pack 宝洁公司 Procter & Gamble 宝丽来 Polaroid 宝马 BMW 边际成本 Marginal Cost 边际收益 Marginal Benefit 标准差,均差 Standard Deviation 别克 Buick 波立兹调查公司 "Alfred Politz Research, Inc" 波旁王朝 Ancient Age Bourbon 波特福洛分析 Portefolio Analysis 产品差异 Product Differentiation 产品生命周期 Product Life Cycle 产品系列 Product Line
产品组合 Product Mix 阐述 Presentation 超级市场 Supermarket 成对比较法 Paired Comparisons 成功的理想主义者 Successful Idealist 承诺型消费者 Committed Buyer 程度测试 Tachistoscope 橙色商品 Orange Goods 冲动购买 Impulse Buying 重叠率 Duplication 抽样 Sampling 传销 Pyramid Selling 传阅发行量 Pass-on Circulation 词语联想法 Word Associaton 刺激营销 Incentive Marketing 促销 Promotion 达彼思广告公司 Ted Bates & Copany 大卫·奥格威 David Ogilvy 戴比尔斯 De Beers 丹尼尔·斯塔奇公司 Danile Starch & Staff 弹性 Elasticity 到达率 Reach
模具英语专业术语模具的分类: 冲压模(五金模): stamping die 分离模: cutting die 成形模: forming die 塑胶模: plastics mold 注射模: injection mold 压缩模: compression mold 铸塑模: transfer mold 吹塑模: blow mold 吸塑模: suck mold 铸造模: casting die 砂型铸造: sand casting 压铸模: die casting 锻造模: forging die 塑胶模具术语 一、入水:gate 进入位(入水点):gate location 水口形式:gate type 大水口(侧浇口): edge gate 潜水口: sub-gate 薄膜式水口: film gate 牛角式潜水口: banana gate 扇形水口: fan gate 环形水口: ring gate 二次水口: 细水口:pin-point gate 水口大小:gate size 转水口:switching runner/gate 唧嘴口径:sprue diameter 直接水口: direct gate 二、流道: runner 热流道:hot runner,hot manifold 热嘴冷流道: hot sprue/cold runner 唧嘴直流: direct sprue gate 圆形(整圆/半圆)流道:round(full/half) runner 矩形流道: rectangle runner 梯形流道: trapezoid runner U形流道: U shape runner 流道电脑分析(模流分析):mold flow analysis 流道平衡: runner balance
模具(MOULD/MOLD,TOOL): CAVITY:前模 CORE:后模(定模) DIMENSION:寸法 GATE:浇口/水口/入水口 PIN GATE:点水口/点浇入水 SIDE GATE:边水口/侧浇入水/大水口APPERANCE SURFACE:体裁面WARPAGE DIRECTION:变形方向 DRAFT ANGEL:脱模斜度 PARTING LINE/P。L:分模线 EJECT PIN/E。P:注塑顶针 BLAST/TEXTURE:喷啥,蚀纹 MIRROR FINISH:镜面(抛光)处理POLISH:抛光 EMD:放电加工 WELD:熔接加工(烧焊) LATHE:车床 MILLING CUTTER:铣刀 MILLING MACHINE:铣床 WIRE CUT:线切割 CNC:主加工中心 POWER DRILL:电钻 DRILLING:钻孔 FRITING:烧结 ANNEALING:淬火 注塑术语(INJECTION) SCREW:螺杆 WELD LINE:熔接线 SINK MARK:缩水 DRAG MARK:脱花 BURR:批锋 FLOW MARK:流纹 SHADOW MARK/GLOSS DIFFERENCE:光影SHORT:缺胶 INJECTION CYCLE:成型周期
注塑英语 型厚大小 Thick size 锁模结构(机绞/直压) Mode locking structure(machine twists/straight pressure) 最大开模距离 The biggest die sinking is away from 动模板最大模具重量 Moves the template maximum mold weight 哥林柱间距 Elder brother forest column spacing 顶出形式(电动五点,油压五点,油压十三点) Goes against the form (electrically operated five spots, flowing tubing head pressure five spots, flowing tubing head pressure 13 spots) 顶出长度 Goes against the length 顶棍孔直径 Goes against the stick hole diameter 顶棍孔中心矩 Goes against the stick hole central moment 螺杆材质(合金) Screw rod material quality (alloy) 螺杆转速 Screw rod rotational speed 最大射出体积 Projects the volume most greatly 最大射出量 Projects the quantity most greatly 射出率 Ejection rate 每10mm射出量(理论) Each 10mm projects the quantity (theory) 射咀直径 Shoots ju the diameter 射咀R值 Shoots ju the R value 射咀空径 Shoots ju the spatial diameter 定位环直径 Locating ring diameter 溶胶能力 Sol ability 驱动方式(全自动/全液压)
机械制造专业英 语 abrasive cloth 砂布 abrasive paper 砂纸 abrasive wheel 砂轮 absolute coordinates 绝对坐标absolute error 绝对误差 absolute value 绝对值 absorb 吸收 absorbability 吸收性 hygrometer湿度计 refrigeration吸收式制冷 ac 交流交变电流 acceleration 加速 acceleration of gravity 重力加速度accelerator 加速器 acceptance test 验收试验accumulator plate 蓄电池极板accuracy 精确度 coating 保护层 acoustic absorbing material 吸音材料acoustic insulation 隔音 resonance共振 vibration s 振动 activated carbon 活性炭 activation激活 adhesion 附着 coefficient 系数 expansion 膨胀 adjustable resistance 可变电阻adjustable wrench 活动扳手admission 进气 admission port 吸气口 aerial 天线 aerodynamic 气体动力的 resistance 阻力 afterheat 余热 hardening硬化 air bleed 放气 air cleaner 空气滤清器air cushion 气垫 air damping空气阻尼 air inflating 充气 air infiltration 漏风 air inlet 进气口 air proof 不透气的,密封的 air purification 空气净化thermometer温度计 air vent 通风孔 alkali[ ?lk?la?]碱 alkaline solution 碱性溶液 all purpose 万能的 allowable error 容许误差 component成分 brass黄铜 bronze青铜 aluminum casting 铝铸件 condenser冷凝器 refrigerator冷冻机 amortization[?m?t?’ze???n ]折旧analytical mechanics分析力学 angle of reflection 反射角 angle of refraction 折射角 displacement位移 anode [?nod]正极,阳极/positive pole cathode[‘k?θod]阴极,负极/negative pole dissolution溶解 antenna [?nt?n?]天线 anticlockwise rotation 逆时针方向旋转anticorrosion防腐蚀 antioxidant 抗氧化剂 antirusting paint 防蚀涂料 antiseptic 防腐剂 antiskid 防滑 aperiodic motion 非周期性运动 applied mechanics 应用力学 applied thermodynamics应用热力学approximate value 近似值 Archimedes'principle阿基米德原理area of bearing 支承面 arrangement 排列,布置 arrowhead 箭头 articulated 铰链式的 articulated arm 关节杆
钣金设计中常用的其它术语 扩孔enlarge hole 自铆self-chinching 全周压毛边all round burr 平头拉钉set-head rivet 表面处理finish 定位销dowel pin 挂钩hook 平头铆钉closed-end rivet 焊接线weld line 塑料固定栓fastener, plastic, push-type 压合胶粘剂pressure sensitive adhesive 尼龙绑带tie wrap, nylon 五金件hardware 泡棉静电导片gasket, foam, emi 贴纸labeling 铍铜静电导片gasket, beck, emi 烤漆paint 圆头螺钉button-head screw 电镀plating 平头螺母nut flush 铭板nameplate 平齐自铆flush, self-clinching 包装packing 紧固螺丝fix screw 铁材零件sheet metal parts 组装assembly 塑料零件plastic parts 凹陷,顶针sink mark 压边铆钉open-end rivet 插孔jack 弹簧螺丝caps 度thick 文字,记号char actor 半冲孔spring slice 角corner 基座chassis 自锁螺母nut self-clenching 承座bracket 轴肘式铆接toggle lock 承架horsing 卡尺caliper 下盖base 打印字模stamp letter 去毛边deburr 推板导住ejector guide 直导套guide bush, straight[straight bushing] 带头导套guide bush, straight {shoulder bushing} 推板导套ejector guide bush[ejector bushing] 定位圈Locating ring 锥形定位件mould bases locating elements 复位杆ejector plate return pin[push-back pin] 限位钉stop pin[stop but ton] 限位块stop block [stop pad] 定距拉杆puller[length]bolt 定距拉板puller[limit]plate 成形推杆forming ejector pin 圆柱头推杆ejector pin with cylindrical head 带肩推杆shouldered ejector pin 扁推杆flat ejector pin 推管ejector sleeve 推块ejector pad 推件板stripper plate 推杆固定板ejector retainer plate ; 推板ejection plate[elector plate] 连接推杆ejector tie rod 冲裁间隙blanking clearance 模具闭合高度die shut height 压力机闭合高度shut height Of press machine 冲模寿命die life 压力中心center Of load 冲模中心center Of die 冲压方向pressing direction 送料方向feed direction 排样blank layout 搭边scrap 进距feed pitch 切边余量trimming allowance 毛刺burr 冲裁力blanking force 弯曲力bending force 拉仲力drawing force 挤压力extruding force 卸料力stripping force 推件力ejecting force 顶件力kicking force 压料力pressure plate force 压边力black holder force 毛坯blank ;
五金模具常用专业术语中英文对照表 上模座upper die set成型公form punch 脱料板stripper 垫板subplate/backup plate 下模座die plate滑块CAM slider 垫脚parallel 误检misfeeder 托板mounting plate顶料销kick off 初始管位first start pin带肩螺丝shoulder screw 两用销lifter pin氮气汽缸gas spring 弹簧护套spring cage 拔牙螺丝jack screw 侧冲组件cam section 导正装置guide equipment 漏废料孔slug hole刀口trim line 加强装置enhance equipment 入子insert 护套bushing 整形公restrike forming punch 止挡板stop plate 挂台head 扣位pocket of head 导柱guide post 导套guide bushing 油嘴oil nipple 接刀口mismatch/cookie bites 限位块stop block 挡块stopper 浮块lifter 压块keeper 靠块heel 对正块alignment block 简易模prototype tooling 检具gage/checking fixture 料带图strip layout 闭合高度shut hight 俯视图top view 料带strip 公差tolerance 正视图front view 走位travel 避位/空pocket 退磁demagnetization 间隙clearance 真空热外理vacuum heat treatment 镗孔mill hole 表面外理surface coasting 镀钛TD coasting 沉头counter sink 精锣finish mill 线割wire cutting 穿丝孔first wire hole 斜度taper 镭射laser-cut 上夹板/固定座holder/retainer 下模座lower die set 成刑母公forming die 电火花EDM 码模槽mounting slot 球锁紧固定座ball-lock 导尺rail 球锁紧凸模BALL--LOCK 送料板rail plate 外购out sourcing 倒角chamfer 清角SCRAP CHOPPER 销钉dowel 尖角sharp --angle 普通弹簧coil spring 展开图EXPENSINg DWG 三打螺丝spool 镶件insert 毛刺burr 键销key 插针pilot pin
组装、冲压、喷漆等专业词汇 Assembly line组装线 Layout布置图 Conveyer流水线物料板 Rivet table拉钉机 Rivet gun拉钉枪 Screw driver起子 Electric screw driver电动起子Pneumatic screw driver气动起子worktable 工作桌 OOBA开箱检查 fit together组装在一起 fasten锁紧(螺丝) fixture 夹具(治具) pallet栈板 barcode条码 barcode scanner条码扫描器 fuse together熔合 fuse machine热熔机 repair修理 operator作业员 QC品管 supervisor 课长 ME制造工程师 MT制造生技 cosmetic inspect外观检查 inner parts inspect内部检查thumb screw大头螺丝 lbs. inch镑、英寸 EMI gasket导电条 front plate前板 rear plate后板 chassis基座 bezel panel面板 power button电源按键 reset button重置键 Hi-pot test of SPS高源高压测试 V oltage switch of SPS 电源电压接拉键 sheet metal parts 冲件 plastic parts塑胶件 SOP制造作业程序 material check list物料检查表
work cell工作间 trolley台车 carton纸箱 sub-line支线 left fork叉车 personnel resource department 人力资源部 production department生产部门 planning department企划部 QC Section品管科 stamping factory冲压厂 painting factory烤漆厂 molding factory成型厂 common equipment常用设备 uncoiler and straightener整平机 punching machine 冲床 robot机械手 hydraulic machine油压机 lathe车床 planer |'plein|刨床 miller铣床 grinder磨床 driller??床 linear cutting线切割 electrical sparkle电火花 welder电焊机 staker=reviting machine铆合机 position职务 president董事长 general manager总经理 special assistant manager特助 factory director厂长 department director部长 deputy manager | =vice manager副理 section supervisor课长 deputy section supervisor =vice section superisor副课长group leader/supervisor组长 line supervisor线长 assistant manager助理 to move, to carry, to handle搬运 be put in storage入库 pack packing包装 to apply oil擦油 to file burr 锉毛刺