Front view of the CIB connector on the RF unit
Pinouts of the CIB connector on the RF unit
Front view of the antenna control connector on the RF unit
Pinouts of the antenna control connector on the RF unit
Pinouts of the DC supply connector on the RF unit
Pin Function
+ +13.6V nominal (10.8 to 16 V DC) - Ground
Front view of the fan connector on the RF unit
Pinouts of the fan connector on the RF unit
Front view of the 10-way connector on the RF unit (AR Voice and VR Mobile transceivers only)
Pinouts of the 10-way connector on the RF unit (AR Voice and VR
Mobile transceivers only)
4-way serial data connector (AR Voice transceivers only) The serial data connector may be used in three modes:
None to be used when no external device is connected to the transceiver GPS to receive GPS position information CICS to control and monitor the transceiver The operating parameters can be set to the following: Baud rate 4800, 9600, 19200, 38400 Data bits 8 Stop bits None Parity 1
Front view of the 4-way connector on the RF unit (AR Voice transceivers only)
Pinouts of the 4-way connector on the RF unit (AR Voice transceivers only)
Front view of the handset and speaker connector attached to the RF unit (AR Voice and
VR Mobile transceivers only)
Junction box connectors (AR, SR , V R and AS R transceivers only) Connector panel of the junction box
Front view of the handset connector on the junction box
Pinouts of the handset connector on the junction box
Front view of a CIB connector on the junction box
Pinouts of the CIB connectors on the junction box
9-way serial data connector
The serial data connector may be used in five modes:
None to be used when no external device is connected to the transceiver GPS to receive GPS position information CICS to control and monitor the transceiver
Modem Data to control the transfer of data between a PC and a modem over a remote control link PC Data to control the transfer of data between a PC using 9102 software and a modem over a
remote control link
Front view of the 9-way serial data connector on the junction box
Pinouts of the 9-way serial data connector on the junction box
Front view of the 15-way GPIO connector on the junction box
Pinouts of the 15-way GPIO connector on the junction box
The headphone jack comprises a 6.3 mm jack with 600 nominal impedance Pinouts of the headphone jack on the desk console