2N6027, 2N6028
Preferred Device Programmable Unijunction Transistor
Programmable Unijunction Transistor Triggers
Designed to enable the engineer to “program’’ unijunction characteristics such as R BB, h, I V, and I P by merely selecting two resistor values. Application includes thyristor?trigger, oscillator, pulse and timing circuits. These devices may also be used in special thyristor applications due to the availability of an anode gate. Supplied in an inexpensive TO?92 plastic package for high?volume requirements, this package is readily adaptable for use in automatic insertion equipment.
Features
?Programmable ? R BB, h, I V and I P
?Low On?State V oltage ? 1.5 V Maximum @ I F = 50 mA ?Low Gate to Anode Leakage Current ? 10 nA Maximum ?High Peak Output V oltage ? 11 V Typical
?Low Offset V oltage ? 0.35 V Typical (R G = 10 k W)
?Pb?Free Packages are Available*
*For additional information on our Pb?Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
Preferred devices are recommended choices for future use and best overall value.
See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet.
ORDERING INFORMATION
TO?92 (TO?226AA)
CASE 029
STYLE 16
3
1
PIN ASSIGNMENT
1
2
3
Gate
Cathode
Anode
https://www.sodocs.net/doc/722883876.html,
2N602x=Device Code
x = 7 or 8
A=Assembly Location
Y=Year
WW=Work Week
G=Pb?Free Package
MARKING DIAGRAM
2N
602x
AYWW G
G
(Note: Microdot may be in either location)
MAXIMUM RATINGS (T J = 25°C unless otherwise noted)
Rating Symbol Value Unit
Power Dissipation*
Derate Above 25°C
P F
1/q JA
300
4.0
mW
mW/°C
DC Forward Anode Current* Derate Above 25°C I T150
2.67
mA
mA/°C
DC Gate Current*I G"50mA
Repetitive Peak Forward Current 100 m s Pulse Width, 1% Duty Cycle
20 m s Pulse Width, 1% Duty Cycle*I TRM
1.0
2.0
A
Non?Repetitive Peak Forward Current
10 m s Pulse Width
I TSM 5.0A Gate to Cathode Forward Voltage*V GKF40V Gate to Cathode Reverse Voltage*V GKR*5.0V Gate to Anode Reverse Voltage*V GAR40V Anode to Cathode Voltage* (Note 1)V AK±40V Capacitive Discharge Energy (Note 2)E250m J Power Dissipation (Note 3)P D300mW Operating Temperature T OPR?50 to +100°C Junction Temperature T J?50 to +125°C Storage Temperature Range T stg?55 to +150°C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
*Indicates JEDEC Registered Data
1.Anode positive, R GA = 1000 W
Anode negative, R GA = open
2. E = 0.5 CV2 capacitor discharge energy limiting resistor and repetition.
3.Derate current and power above 25°C.
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit Thermal Resistance, Junction?to?Case R q JC75°C/W Thermal Resistance, Junction?to?Ambient R q JA200°C/W Maximum Lead Temperature for Soldering Purposes
(t1/16″ from case, 10 seconds maximum)
T L260°C
ELECTRICAL CHARACTERISTICS (T C = 25°C unless otherwise noted)
Characteristic
Fig. No.Symbol Min Typ Max Unit Peak Current*
(V S = 10 Vdc, R G = 1 M W )2N60272N6028(V S = 10 Vdc, R G = 10 k W )2N60272N6028
2,9,11
I P
???? 1.250.084.00.70 2.00.155.01.0m A
Offset Voltage*
(V S = 10 Vdc, R G = 1 M W )2N60272N6028(V S = 10 Vdc, R G = 10 k W )(Both Types)
1
V T
0.20.20.20.700.500.35 1.60.60.6V
Valley Current*
(V S = 10 Vdc, R G = 1 M W )2N60272N6028(V S = 10 Vdc, R G = 10 k W )2N60272N6028(V S
= 10 Vdc, R G = 200 W )
2N60272N6028
1,4,5
I V
??70251.51.01818150150??5025????m A mA Gate to Anode Leakage Current*
(V S = 40 Vdc, T A = 25°C, Cathode Open)(V S = 40 Vdc, T A = 75°C, Cathode Open)?I GAO
?? 1.03.010?nAdc
Gate to Cathode Leakage Current
(V S = 40 Vdc, Anode to Cathode Shorted)?I GKS ? 5.050nAdc Forward Voltage*
(I F = 50 mA Peak) (Note 4)1,6V F ?0.8 1.5
V Peak Output Voltage*
(V G = 20 Vdc, C C = 0.2 m F)3,7V o 6.011?V Pulse Voltage Rise Time
(V B = 20 Vdc, C C = 0.2 m F)
3
t r
?
40
80
ns *Indicates JEDEC Registered Data
4.Pulse Test: Pulse Width ≤ 300 m s, Duty Cycle ≤ 2%.
Programmable Unijunction
with Program" Resistors R1 and R2
1A ?R1
R1 + R2R1
R2? V S =V
B
R
R
G = R/2S = V t
Figure 2. Peak Current (I P ) Test Circuit
Figure 3. V o and t r Test Circuit
I , V A L L E Y C U R R E N
T ( A )V
m
I F , PEAK FORWARD CURRENT (AMP)V S , SUPPLY VOLTAGE (V)
0.02
0.01
0.05
0.1
100
20305.015250.2
2.0
0.5
1.0
5.0
3540
K G
E
Circuit Symbol
B2B1
R 1R 2
R1
R1 + R2R BB = R1 + R2h =
Equivalent Circuit
with External Program"Resistors R1 and R2
Typical Application
C C
Figure 6. Forward Voltage Figure 7. Peak Output Voltage
Figure 8. Programmable Unijunction
V P , P E A K F O R W A R D V O L T A G E (V )
V S , SUPPLY VOLTAGE (V)T A , AMBIENT TEMPERATURE (°C)
I , P E A K C U R R E N T ( A )P
m 2N6027
V S , SUPPLY VOLTAGE (V)
T A , AMBIENT TEMPERATURE (°C)
I , P E A K C U R R E N T ( A )P
m 2N6028
Figure 9. Effect of Supply Voltage and R G Figure 10. Effect of Temperature and R G
Figure 11. Effect of Supply Voltage and R G
Figure 12. Effect of Temperature and R G
ORDERING INFORMATION
U.S.
European Equivalent
Shipping ?
Description of TO?92 Tape Orientation
2N60272N6027RL12N6027RL1G
5000 Units / Box
N/A ? Bulk
2N6027G 2N60282N6028G 2N6027RLRA 2000 / Tape & Reel Round side of TO?92 and adhesive tape visible
2N6027RLRAG 2N6028RLRA 2N6028RLRAG 2N6028RLRM 2000 / Tape & Ammo Box
Flat side of TO?92 and adhesive tape visible
2N6028RLRMG 2N6028RLRP Round side of TO?92 and adhesive tape visible
2N6028RLRPG
?For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
*The “G’’ suffix indicates Pb?Free package available.
PACKAGE DIMENSIONS
TO?92 (TO?226AA)CASE 029?11ISSUE AL
STYLE 16:
PIN 1.ANODE
2.GATE
3.CATHODE
NOTES:
1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 198
2.
2.CONTROLLING DIMENSION: INCH.
3.CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED.
4.LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM.
DIM
MIN MAX MIN MAX MILLIMETERS
INCHES A 0.1750.205 4.45 5.20B 0.1700.210 4.32 5.33C 0.1250.165 3.18 4.19D 0.0160.0210.4070.533G 0.0450.055 1.15 1.39H 0.0950.105 2.42 2.66J 0.0150.0200.390.50K 0.500???12.70???L 0.250??? 6.35???N 0.0800.105 2.04 2.66P ???0.100??? 2.54R 0.115??? 2.93???V
0.135???
3.43???
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
分销商库存信息:
ONSEMI
2N6027RLRAG2N6028RLRAG2N6028G
2N6027G2N6027RL1G2N6028RLRMG 2N6028RLRPG2N6027RLRA2N6028RLRA 2N6027RL12N6028RLRP