Ratings
Parameter Symbol 8200L Series
8300L Series
Unit SI-8201L SL-8202L SI-8203L SI-8204L SI-8221L SI-8211L SI-8213L SI-8301L SI-8303L DC Input Voltage Range V IN 10 to 4011 to 4016 to 4010 to 408 to 3515 to 5522 to 558 to 408.5 to 40V Output Current Range I O 0 to 0.4
0 to 0.35
0 to 0.40 to 0.30 to 0.28
0 to 1A Operating Temperature Range
T op
–10 to +65
–20 to +85
°C
SI-8200L/8300L Features
q Integrated switching IC and coil construction q Requires 2 external components only q Low switching noise q
Heatsink not required
Applications
q For power supplies in telephone sets q For power supplies in office equipment
s Absolute Maximum Ratings
s Lineup
8200L Series
8200L Series (high-VIN type)
8300L Series
Type No.V O I O Type No.V O I O Type No.V O I O SI-8201L 5V 0.4A SI-8211L 5V
0.3A
SI-8301L 5V 1A SI-8202L 6V 0.35A SI-8213L
12V 0.28A
SI-8303L
5.4V
1A
SI-8203L 12V 0.35A
SI-8204L 5.2V 0.4A SI-8221L
5V
0.4A
Ratings
Parameter Symbol 8200L Series
8300L Series
Unit SI-8201L SL-8202L SI-8203L SI-8204L SI-8221L SI-8211L SI-8213L SI-8301L SI-8303L
DC Input Voltage V IN 45
4060
45
V Storage Temperature
T stg
–25 to +85
°C
s Recommended Operating Conditions
Switching Type
Self Oscillation Type with Coil
Parameter
Symbol
Unit
Parameter
Symbol
Unit
Output Voltage V Efficiency
%Line Regulation mV Load Regulation
mV
?V O /?T ±1.5±1.5
±1.5±1.5
±0.5±1.5mV/°C mV p-p
s Electrical Characteristics (Ta=25°C)
Output Voltage V Efficiency
%Line Regulation mV Load Regulation
mV ?V O /?T ±1.5±1.5±1.5
±1.5mV/°C mV p-p
Ratings
SI-8200L Series
SI-8201L SI-8202L SI-8203L SI-8204L SI-8221L min
typ max min
typ max min
typ max min
typ max min
typ max
V O
4.9
5.0 5.1
5.9
6.0 6.1
11.812.012.2 5.1
5.2 5.3
4.85
5.00 5.15 Condition V IN =15V, I O =0.2A V IN =20V, I O =0.2A V IN =25V, I O =0.2A
V IN =15V, I O =0.2A
V IN =15V, I O =0.2A η737479737680 Condition V IN =15V, I O =0.2A
V IN =20V, I O =0.2A
V IN =25V, I O =0.2A
V IN =15V, I O =0.2A
V IN =15V, I O =0.2A
Switching Frequency f 25
25
25
25
25
kHz
?V OLINE 1560156015601560515 Condition V IN =10 to 20V, I O =0.2A V IN =11 to 29V, I O =0.2A V IN =16 to 34V, I O =0.2A V IN =10 to 20V, I O =0.2A V IN =10 to 20V, I O =0.2A ?V OLOAD
15
60
15
60
60
100
15
60
15
60
Condition V IN =15V, I O =0.02 to 0.25A V IN =20V, I O =0.02 to 0.3A V IN =25V, I O =0.02 to 0.35A V IN =15V, I O =0.02 to 0.25A V IN =15V, I O =0.02 to 0.25A
Temperature Coefficient of Output Voltage Switching Ripple Voltage ?V r
30
60
3060
100
3030
60
(C 2=470μF)
Condition V IN =25V, I O =0.3A V IN =25V, I O =0.3A
V IN =40V, I O =0.35A V IN =25V, I O =0.3A
V IN =25V, I O =0.3A
Ratings
SI-8200L Series (high-V IN type)SI-8300L Series
SI-8211L SI-8213L SI-8301L
SI-8303L min
typ max min typ max min typ max min typ max V O 4.9
5.0 5.1
11.8
12.012.2
5.0
5.1 5.2
5.3
5.4 5.5
Condition
V IN =35V, I O =0.2A V IN =38V, I O =0.2A V IN =15V, I O =0.5A V IN =15V, I O =0.5A
η63787373 Condition
V IN =35V, I O =0.2A V IN =38V, I O =0.2A
V IN =15V, I O =0.5A
V IN =15V, I O =0.5A
Switching Frequency f 25
25
25
25
kHz ?V OLINE 6060
50
50
Condition V IN =20 to 50V, I O =0.2A
V IN =22 to 50V, I O =0.2A
V IN =10 to 20V, I O =0.5A
V IN =10 to 20V, I O =0.5A
?V OLOAD
60
60
80
80
Condition V IN =35V, I O =0.02 to 0.3A V IN =38V, I O =0.02 to 0.28A V IN =15V, I O =0.3 to 0.7A
V IN =15V, I O =0.3 to 0.7A
Temperature Coefficient of Output Voltage Switching Ripple Voltage ?V r 30
60
50
100
4545(C 2=470μF)
Condition
V IN =48V, I O =0.3A V IN =48V, I O =0.28A
V IN =15V, I O =0.5A
V IN =15V, I O =0.5A
Switching Type Self Oscillation Type with Coil
s Caution
1. A low-impedance capacitor suitable for switching applications must be used for the external capacitor and must be
connected as close to the IC as possible in order to assure low ripple voltage and stable switching operation. 2.The SI-8200L and 8300L series do not have a built-in overcurrent protection circuit. Thus, avoid short-circuit
conditions that may cause a flow of overcurrent.
3.The SI-8300L series may not start up if the input voltage rises too rapidly.
Do not use the SI-8300L series in applications where the input terminal, pin6, is opened and closed directly in a state where the input voltage is already applied.
4.Terminals L IN and NC in the connection diagram must be left unconnected to other circuits.
5.The IC’s metallic heatsink is electrically floating. Do not connect it to GND or any other circuit.
6.Since the SI-8200L and 8300L series have an open-package construction, they can only be operated in specific
environments. Verify the operating environment and use the IC within the conditions indicated in the reliability data.
SI-8200L/8300L Series Typical Operating Characteristics (Ta=25°C)
SI-8200L/8300L Series Typical Operating Characteristics (Ta=25°C)