螺丝,紧固件,标准件词汇的中英文对照
高脚螺帽 Hex Coupling Nuts(High Nuts)
圆螺帽 Round Nuts
四角螺帽 Square Nuts
管用螺帽 Pipe Nuts
轮壳螺帽 Wheel Nuts
蝶型螺帽 Wing Nuts
U形螺帽 U Nuts
T形螺帽 T Nuts
环首螺帽 Eye Nuts
齿形螺帽 Kep Nuts
齿花螺帽 Clinch Nuts
耐候钢六角重型螺帽 Corten Steel Heavy Hex Nuts
焊接螺帽 Weld Nuts
高张力螺帽 Heigh Strength Nuts
建业用螺帽 Structural Nuts
不锈钢螺帽 Stainless Steel Nuts
铜螺帽 Brass Nuts
铝螺帽 Aluminum Nuts
合金钢螺帽 Alloy Steel Nuts
重型车螺帽 Heavy Duty Wheel Hub Nuts
铁器焊接袋帽 Acorn Cap Nuts
金属预置扭矩式螺帽 All-Metal Prevailing Torque Type Nuts 壁虎螺帽 Anchor Nuts
大尺寸螺帽 Big Size Nuts
铁盖袋帽 Closed End Acorn Nuts
盘形华司螺帽 Conical Washer Nuts
铁盖+尼龙圈组合盖帽 Din 986 Domed Cap Nuts
突缘尼龙盖帽 Flange Nylon Insert Lock Nuts
平面华司螺帽 Flat Waser Nuts
六角割沟螺帽 Hex Slotted Nut
自锁螺帽 Self-Locking Nuts
制止螺帽 Sliding Nuts
Sln-自动防松螺帽 Sln Self-Locking Nuts
其它特殊螺帽 Special Nuts
弹簧螺帽 Spring Nuts
不锈钢突缘螺帽 Stainless Steel Flange Nuts
不锈钢六角轮缘尼龙螺帽 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽 Stainless Steel Heavy Hex Nuts
不锈钢六角螺帽 Stainless Steel Hex Nuts
不锈钢尼龙嵌入螺帽 Stainless Steel Nylon Insert Lock Nuts
锌压属螺帽 Zinc Die Casting Nuts
普通六角螺帽 Hex Nuts
六角重型螺帽 Heavy Hex Nuts
薄型螺帽 Hex Jam Nuts
尼龙嵌入防松螺帽 Nylon Insert Lock Nuts
机械螺丝用六角螺帽 Hex Machine Screw Nut
合金钢线材盘元 Alloy Steel Wire Rod
球状化线材 Annealing Wire And Rod
黑铁丝 Black Wire
黄铜棒线 Brass Wire And Rod
磨光棒钢 Bright Steel Bar(Hex/Round/Square)
铜合金线 Copper Alloy Wire
线切割线 E.D.M Cutting Wire
快削钢线材盘元 Free Cutting Steel Wire Rod
线材 Iron Or Steel Wire
线材盘元 Iron Or Steel Wire Rod
洋白铜线 Nickel Silver Wire
磷青铜线 Phosphate Bronze Wire
不锈钢条棒 Stainless Steel Bar(Round/Hex/Square)
不锈钢冷锻线材 Stainless Steel Cold Heading Wire
不锈钢线(抽线后) Stainless Steel Draw Wire
不锈钢线材 Stainless Steel Wire
不锈钢线材及盘元 Stainless Steel Wire And Rod
棒钢 Steel Bar(Hex/Round/Square)
转回90度碾线头机 90讧evolving Wire Twisting Machine
气动拉钉机 Air Riveter
各式螺丝类产品自动包装 Automatic Packaging For All Kinds Of Packaging 自动包装机 Automatic Packing Machine
螺丝制造搓牙机械 Automatic Thread Rolling Machine
螺丝割尾加工机械 Automatic Thread Slotting Machine
螺丝制造成型机械 Automatic Trimming Machine
拉钉打头机 Blind Rivet Heading Machine
螺丝、螺帽成型机 Bolt Formers,Nuts Formers,Headers
螺丝、螺帽热处理 Bolt Nut And Screws Heat Treatment
螺丝、螺帽热处理炉 Bolt Nut And Screws Heat Treatment Furnaces
球状化电器炖炉 Carburizing Furnace Vacuum And Bell Type Furnace
超防锈复合瓷膜 Ceramic Coating
连续式光辉渗碳淬火炉 Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉 Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉 Continuous Bright Heat Treat Furnace
连续式光辉热处理炉 Continuous Type Bright Heat Treatment Furnace
螺丝割尾及特殊割遘加工 Machine Screw Shank Slotting
螺丝钻孔加工 Screw Shank Drilling
鸡眼上下模 Eyelets Dies
一般线材、盘元、退火炉 General Wire,Wire Rod,Annealing Furnace
倒立式滑落型伸线机 Handstand Type Wire Drawing Machine
十字冲模 Header Punches In Various Drives
成型冲模 Header Punches In Various Drives
螺丝打头机 Heading Machine
螺丝制造高速搓牙机械 High Speed Automatic Thread Rolling Machine
高中低周波感应加热炉 High,Medium,Low Frequency Induction Heater
空心打头机 Hollow Heading Machine
热浸镀锌螺丝、螺帽 Hot Dip Galvanizing Bolts And Nuts
机械镀锌 Mechanical Galvanized
迷你成型机 Mini-Formers
成品自动收线机 Non-Stop Coiler
精抽自动收线机 Non-Stop Coiler(Skinpass)
螺帽模 Nut Forming Dies
螺帽成型模 Nuts Formers
特殊零件成型机 Parts Forming Maching
冲模 Punch Dies
冲子 Punch Pins
罗拉成型机 Rollers Formers
机(踏)车用螺丝成型机 Screw For Motorcycle Or Bicycle Heading Machine
止付螺丝成型机 Set Screws Formers
套高成型机 Sockets Formers
一般线材、盘元、螺丝合金炖炉 Spheroidizing Bright Annealing Furnace
球状化热处理炉 Spheroidizing Heat Treatment Furnace
攻牙机 Tapping Machine
螺丝攻、车刀、模具 Taps Dies And Tools
搓牙机铁屑分离装置 Thread Chip Separator
滚牙轮 Thread Rolling Dies
牙板 Thread Rolling Dies Plates
精密油压滚牙机 Hydraulic Thread Rolling Machines
模具 Tools
六角整头模 Trimming Dies Hexagan
碳化钨模具 Tungsten Carbide Die
镀钛处理(Tin)专业加工服务 Tin Hard Coating For Cutting Tools And Punch By Pvd 电镀化学原料 Various Electroplating Chemicals
环规校正 Calibration For Ring Gage
环规、牙规、三线规校正 Calibration For Ring Gage, Athread Gage, 3 Wire Gage 螺丝、螺帽品检量测仪器 Fasteners Inspection And Measurement Instruments 螺丝、螺帽成型攻牙专用油 Forming And Tapping Oils For Bolts And Nuts Formers 螺丝、螺帽五金等检验 Insptection Services For Fasteners And Hardware
德国schatz扭力机代理 Representative Of Schatz Torque Machin
Iso品质保证系统 Iso Quality Assurance System
生产管理系统 Production Control System
物料管理系统 Material Control System
齿轮 Gears
不锈钢牙条棒 Stainless Steel Hread Rod
马达轴承轴心组件 Bearing Shaft(Motor)
轴承轴心 Bearing Shaft
开口铆钉 Blind Rivets
长形拉帽 Blind Rivet Nuts
拉帽 Blind Nuts
拉钉 Blind Rivets
实心梢 Clevis Pins And Straight Pins
弹片 Clips
卷钉 Coil Nails
冷锻零件 Cold Forming Part
开口销 Cotter Pins
E型环 E-Rings
膨胀螺栓 Expansion Anchor Bolts
鸡眼钉 Eyelets Rivets
R型销 Snap Pins
闸、锁 Latches And Keeper Assembleds
其它特殊铆钉 Other Specil Rivets
销 Pins
格式管夹、管束 Pipe Hanger
铆钉 Rivets
螺旋锔及螺旋圈 Screw Hook And Screw Rings 中空钉 Semi-Tubular Rivet
开叉钉 Split Drive Anchors
弹簧华司 Spring Washers
弹簧蝴蝶夹 Spring Wings
不锈钢华司 Stainlesssteel Washers
钢铁钉 Steel And Iron Nails
搓牙铁钉 Thread Nails
钛合金铆钉 Titaium Alloy Rivets
管形铆钉 Tubular Rivets
华司 Washers
真空热处理 Vacuum Heat Treatment
螺丝、螺帽、五金、Diy扣件 Fasteners
合金钢工具 Alloy Steel Tools
螺栓模 Bolt Heading Dies
手动拉钉钳 Hand Riveter
船舶链 Anchor Chain
脚踏车链锁 Bicycle Chain Locks
螺丝起子 Bit
罗拉 Chain Roller
特殊铆合扣件 Collars(A Blindfastener For Huck Intl)
装饰链 Decorative Chains
自攻螺纹衬套 Ensat Threaded Inserts
六角扳手 Hexagon Keys
超音螺纹压入式螺纹自动锁扣 Threaded Inserts For Plastic Injection Mouldeings 汽车特殊杆接件 Special Auto-Mobile Fastener As Your Needs
螺纹护套 Recoil Inserts
链条用滚子 Roller For Roller Chain
金属板镶嵌组件及自动夹扣组件 Sheet Metal Fasteners
工具套筒组件 Socket Wrench Sets
不锈钢链 Stainless Steel Chains
轭子 T-Yoke
轮胎链 Tire Chains
狗链 Dog Chains
喇叭头轭铁 U-Yoke,T-Yoke For Speaker
不锈钢输送带轮用轨道 Stainless Wheel's Rack For Transporter
工业用链 Industrial Steel Link Chains
拖链安全链 Tow Chains And Safety Chains
机车离合器零件 Manufacture Of Motorcycle's Cvt Parts
牙条棒 Thread Rod
紧固件中英文对照
最全紧固件中英文对照，外贸必备词典！ 一、紧固件 Fasteners 标准紧固件 Standard Fasteners 非标准紧固件 Nonstandard Fasteners 特殊紧固件 Special Fasteners 汽车紧固件 Automotive Fasteners 铜制紧固件 Brass Fasteners 航天用紧固件 Aerospace Fasteners 精密紧固件 Precision Fasteners 化学紧固件 Chemical Fasteners 摩托车紧固件 Motorcycle Fasteners 不锈钢紧固件 Stainless Steel Fasteners 铁道紧固件 Railway Fasteners 防松紧固件 Self-locking Fasteners 高强度紧固件 High strength Fasteners PEM紧固件 PEM Fasteners 钢结构紧固件 Steel Structural Fasteners 压铆紧固件 Self-Clinching Fasteners
铝制紧固件 Aluminum Fasteners 钛合金紧固件 Titanium Alloy Fasteners 尼龙紧固件 Nylon Fasteners 精制紧固件 Finished Fastener 粗制紧固件 Unfinished Fastener 螺纹紧固件 Threaded Fastener 半精制紧固件 Semi-Finished Fastener 抗剪紧固件 Shear Fastener 抗拉紧固件 Tension Fastener 面板紧固件 Panel Fasteners 二、螺栓 Bolts 六角头螺栓Hexagon Head Bolts 六角法兰面螺栓Hexagon Flange Bolts 轨道螺栓（鱼尾螺丝）Track Bolts 高强度螺栓 High Strength Bolts 地脚螺栓Eyelet Bolts 马车螺栓 Carriage Bolts 护拦螺栓 Guardrail Bots 焊接螺栓 Weld Bolts
螺丝,紧固件,标准件词汇的中英文对照
高脚螺帽 Hex Coupling Nuts(High Nuts) 圆螺帽 Round Nuts 四角螺帽 Square Nuts 管用螺帽 Pipe Nuts 轮壳螺帽 Wheel Nuts 蝶型螺帽 Wing Nuts U形螺帽 U Nuts T形螺帽 T Nuts 环首螺帽 Eye Nuts 齿形螺帽 Kep Nuts 齿花螺帽 Clinch Nuts 耐候钢六角重型螺帽 Corten Steel Heavy Hex Nuts 焊接螺帽 Weld Nuts 高张力螺帽 Heigh Strength Nuts 建业用螺帽 Structural Nuts 不锈钢螺帽 Stainless Steel Nuts 铜螺帽 Brass Nuts 铝螺帽 Aluminum Nuts 合金钢螺帽 Alloy Steel Nuts 重型车螺帽 Heavy Duty Wheel Hub Nuts 铁器焊接袋帽 Acorn Cap Nuts 金属预置扭矩式螺帽 All-Metal Prevailing Torque Type Nuts 壁虎螺帽 Anchor Nuts 大尺寸螺帽 Big Size Nuts
铁盖袋帽 Closed End Acorn Nuts 盘形华司螺帽 Conical Washer Nuts 铁盖+尼龙圈组合盖帽 Din 986 Domed Cap Nuts 突缘尼龙盖帽 Flange Nylon Insert Lock Nuts 平面华司螺帽 Flat Waser Nuts 六角割沟螺帽 Hex Slotted Nut 自锁螺帽 Self-Locking Nuts 制止螺帽 Sliding Nuts Sln-自动防松螺帽 Sln Self-Locking Nuts 其它特殊螺帽 Special Nuts 弹簧螺帽 Spring Nuts 不锈钢突缘螺帽 Stainless Steel Flange Nuts 不锈钢六角轮缘尼龙螺帽 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽 Stainless Steel Heavy Hex Nuts 不锈钢六角螺帽 Stainless Steel Hex Nuts 不锈钢尼龙嵌入螺帽 Stainless Steel Nylon Insert Lock Nuts 锌压属螺帽 Zinc Die Casting Nuts 普通六角螺帽 Hex Nuts 六角重型螺帽 Heavy Hex Nuts 薄型螺帽 Hex Jam Nuts 尼龙嵌入防松螺帽 Nylon Insert Lock Nuts 机械螺丝用六角螺帽 Hex Machine Screw Nut 合金钢线材盘元 Alloy Steel Wire Rod 球状化线材 Annealing Wire And Rod
螺丝批头英文翻译
螺纹大径：Major Diam 螺纹中径：Pitch diam 螺纹底径：Minor diam 通止规：Go/No go gage 机械性能：mechanical and physical properties unified thread 统一英制螺纹 Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆 Case carburization 表面渗碳 With across flats 对边 With across corners 对角 Radius of fillet:头下圆角 Transition thread length 过度螺纹 Wrenching height 扳拧高度 Rockwell 铬氏硬度 Vickers 维氏硬度 Brinell 布氏硬度 Metallography microscope 金相显微镜 Salt spray device 盐雾试验箱 Tensile testing machine 拉力试验机 Cold forming 冷打 Hot forging 红镦 P C 8 = property class 8 机械性能8级 原材料：Raw material 球化退火：Annealing 冷拔：Drawing 冷镦：Forming 机加工：Machining 螺纹成型：Roll Threading 热处理：heat-treatment 表面处理：finish 去氢：Lustrating hydrogen 检验：Inspection 包装：Packing 入库：Stocking 车床：lathe 磨制：grinding红打：hot forging 冲压：punching Diameter 直径Length 长度 1 标准(接触的比较常用的就是德标和美标) GB （国标）ISO(国际标准) DIN （德制） JIS （日标） ANSI /ASME （American National Standards Institute – ANSI；American Society Of Mechanical Engineers – ASME）（美标） BS （英制） IFI =Industrial Fastener Institute是美国工业紧固件协会的标准 2 螺纹 M. MF (公制牙) UNC.（美制粗牙） UNF (美制细牙) UNEF (美制超细牙) B.S.W. 标准惠氏粗牙系列，一般用途圆柱螺纹 B.S.F. 标准惠氏细牙系列，一般用途圆柱螺纹
螺丝名称的中英文对照表精选版
螺丝名称的中英文对照 表 Document serial number【KKGB-LBS98YT-BS8CB-BSUT-BST108】
螺丝名称的中英文对照表 常用英文单词及简写形式 No. 单词简写中文 1 screw scr 螺丝 2 nut nut 螺母 3 washer wash 垫圈 4 head hd 头 5 thread thre 螺纹 6 coating coat 镀层 7 rivet riv 铆钉 8 standoff stdoff 内外六角钉 9 driver driv 穴 10 hexagon hexa 六角 11 tooth tooth 齿 12 lock lck 锁 13 spring spr 弹簧 14 wave wave 波浪型 15 pitch pitch 牙距 16 partial thread P T 半螺纹 17 PT PT 一种螺纹形式 18 Full Thread FT 全螺纹 19 silver silv 银 20 cone cone 锥形 21 Eco-syn Eco 30度牙的一种螺纹 22 Thread Forming TF 自攻螺纹 23 Self Tapping self tapp 自切屑螺纹 24 pin pin 销 25 shaft Shaf 轴 26 steel St 铁 27 stainless steel SS 不锈钢 28 Brass(Cu) Bras(Cu) 铜 29 Aluminum AL 铝 30 Rubber Rub 橡胶 31 machine screw mech scr 机制螺丝 32 SEM screw SEM Scr 组合螺丝 33 Material material 材料 34 Grade GD 等级
螺栓中英文对照
螺栓中英文对照 ： 六角螺丝(栓) HEX HEAD CAP SCREWS(HEX BOLTS)六角机械螺丝HEX HEAD MACHINE BOLTS六角木牙螺丝HEX LAG BOLTS四角螺丝SQUARE HEAD BOLTST头螺丝T HEAD BOLTS马车螺丝CARRIAGE BOLTS环首螺丝EYE BOLTS内六角孔螺丝HEX SOCKET CAP SCREWS固定螺丝SET SCREWS螺椿栓STUD BOLTS螺旋椿SCREW STUDS轮壳螺栓WHEEL BOLTS翼形螺丝WING SCREWS自攻螺丝SELF TAPPING SCREWS自削螺丝THREAD CUTTING SCREWS钻尾螺丝SELF DRILLING SCREWS旋入螺丝DRIVE SCREWS机械螺丝MACHINE SCREWS木螺丝WOOD SCREWS家具螺丝FURNITURE SCREWS塑板螺丝CHIPBOARD SCREWS墙用螺丝DRYWALL SCREWS基础螺栓FOUNDATION BOLTSU型螺栓U BOLTS勾头螺栓HOOK BOLTS套挂螺丝TOGGLE BOLTS突缘螺丝FLANGE BOLTS轨道螺栓(鱼尾螺丝) TRACK BOLTS耐候钢螺丝CORTEN STEEL HEAVY HEX BOLTS扭矩控制螺栓T. C.BOLTS高张力螺栓HIGH STRENGTH BOLTS剪力钉(焊接螺丝) WELDING STUDS螺丝附华司组合SCREWS AND WASHERS ASSEMBLED(SEMS)大尺寸螺栓BIG SIZE BOLTS不锈钢小螺丝STAINLESS STEEL SHEET METAL SCREWS不锈钢大螺丝STAINLESS STEEL BOLTS铜螺丝BRASS SCREWS铝螺丝ALUMINUM SCREWS合金钢螺丝ALLOY STEEL SCREWS电子螺丝ELECTRONIC SCREWS微小精密螺丝MICRO SCREWS塑胶螺丝PLASTIC SCREWS复合材料用螺丝PARTICLE BOARD SCREWS钛合金螺丝TITANIUM ALLOY BOLTS钛、锆、钼、铌等螺丝、零件、材料 TI,ZR,MO,NB PARE METAL BOLTS PARTS拇指螺丝THUMB SCREWS双头牙螺丝DOUBLE END SCREWS HANGER BOLT车辆(汽车)螺丝、螺帽AUTOMOTIVE FASTENERS航太用螺丝AEROSPACE FASTENERS飞机特殊扣件SOURCE CONTROL BOLTS拉栓BLIND BOLTS面板螺丝PANEL FASTENERS电梯螺丝ELEVATOR BOLTS 四角头固定螺丝SQUARE SET SCREWS大头马车螺丝STEP BOLTS单向螺丝ONE WAY LAG SCREWS管夹螺丝HOSE CLAMP SCREWS不锈钢内六角螺丝STAINLESS STEEL HEX SOCKET CAP SCREWS铰链螺丝HINGE SCREWS货柜螺丝CONTAINER SCREWS复合材料钻尾螺丝BI-METAL SELF DRILLING SCREWS三角牙螺丝TRILOBULAR THREAD SCREWS高低牙螺丝HIGH LOW SCREWS夹板用螺丝PARTICLE BOARD SCREWS马桶螺丝TOILET CLOSET BOLTS特长螺丝SPECIAL
关于螺丝的中英文对照
(浏览56次) No.英文单词简写中文 1 screw scr螺丝 2 nut nut螺母 3 washer wash垫圈 4 head hd头 5 thread thre螺纹 6 coating coat镀层 7 rivet riv铆钉 8 standoff stdoff内外六角钉 9 driver driv穴 10 hexagon hexa六角 11 tooth tooth齿 12 lock lck锁 13 spring spr弹簧 14 wave wave波浪型 15 pitch pitch牙距 16 partial thread PT半螺纹 17 PT PT一种螺纹形式 18 Full Thread FT全螺纹 19 silver silv银
1 / 27 20 cone cone锥形 21 Eco-syn Eco 30度牙的一种螺纹 22 ThreadForming TF自攻螺纹 23 Self Tapping self tapp自切屑螺纹 24 pin pin销 25 shaft Shaf轴 26 steel St铁 27 stainless steel SS不锈钢 28 Brass(Cu) Bras(Cu)铜 29 Aluminum AL铝 30 Rubber Rub橡胶 31 machine screw mech scr机制螺丝（机牙螺丝） 32 SEM screw SEM Scr组合螺丝 33 Material material材料 34 Grade GD等级 35 Finish Finish表面处理 36 Point Point点 37 Clamp Clam夹子 38 internal Int内 39 external ext外
螺丝名称的中英文对照表
螺丝名称的中英文对照表The final revision was on November 23, 2020
螺丝名称的中英文对照表 常用英文单词及简写形式 No. 单词简写中文 1 screw scr 螺丝 2 nut nut 螺母 3 washer wash 垫圈 4 head hd 头 5 thread thre 螺纹 6 coating coat 镀层 7 rivet riv 铆钉 8 standoff stdoff 内外六角钉 9 driver driv 穴 10 hexagon hexa 六角 11 tooth tooth 齿 12 lock lck 锁 13 spring spr 弹簧 14 wave wave 波浪型 15 pitch pitch 牙距 16 partial thread P T 半螺纹 17 PT PT 一种螺纹形式 18 Full Thread FT 全螺纹 19 silver silv 银 20 cone cone 锥形 21 Eco-syn Eco 30度牙的一种螺纹 22 Thread Forming TF 自攻螺纹 23 Self Tapping self tapp 自切屑螺纹 24 pin pin 销 25 shaft Shaf 轴 26 steel St 铁 27 stainless steel SS 不锈钢 28 Brass(Cu) Bras(Cu) 铜 29 Aluminum AL 铝 30 Rubber Rub 橡胶 31 machine screw mech scr 机制螺丝 32 SEM screw SEM Scr 组合螺丝 33 Material material 材料 34 Grade GD 等级
螺丝名词中英文对照
摘要：螺丝名词中英文对照No. 单词简写中文 1 screw scr 螺丝 2 nut nut ... 螺丝名词中英文对照 No. 单词简写中文 1 screw scr 螺丝 2 nut nut 螺母 3 washer wash 垫圈 4 head hd 头 5 thread thre 螺纹 6 coating coat 镀层 7 rivet riv 铆钉 8 standoff stdoff 内外六角钉 9 driver driv 穴 10 hexagon hexa 六角 11 tooth tooth 齿 12 lock lck 锁 13 spring spr 弹簧 14 wave wave 波浪型 15 pitch pitch 牙距 16 partial P T 半螺纹 thread 17 PT PT 一种螺纹形式 18 Full FT 全螺纹 Thread 19 silver silv 银 20 cone cone 锥形 21 Eco-syn Eco 30度牙的一种螺纹 22 Thread TF 自攻螺纹 Forming 23 Self self tapp 自切屑螺纹 Tapping 24 pin pin 销 25 shaft Shaf 轴
26 steel St 铁 27 stainless SS 不锈钢 steel 28 Brass(Cu) Bras(Cu) 铜 29 Aluminum AL 铝 30 Rubber Rub 橡胶 31 machine mech scr 机制螺丝 screw 32 SEM screw SEM Scr 组合螺丝 33 Material material 材料 34 Grade GD 等级 35 Finish Finish 表面处理 36 Point Point 点 37 Clamp Clam 夹子 38 internal Int 内 39 external ext 外 40 thickness / 厚度 41 length / 长度 42 hole / 孔 43 Metric Metcric 公制 44 DIN / 德标 45 ANSI / 美标 46 JIS / 日标 紧固件类英语词汇 白铁盖螺丝A2(18-8)CAP SCREWS 水平调整螺丝ADJUSTED LEVELING SCREWS 航太扣件AEROSPACE FASTENERS 合金钢螺丝(栓) ALLOY STEEL SCREWS (BOLTS) 铝螺丝ALUMINUM SCREWS 车辆(汽车)螺丝、螺帽AUTOMOTIVE FASTENERS 复含材料钻尾螺丝BI-METAL SELF DRILLING SCREWS 大尺寸螺丝BIG SIZE BOLTS 公母螺丝组BINDER POST & SCREW SET
标准件常用英语
紧固件常用英语(Commonly used terminology in fasteners) 1. 机械螺丝Machine screws 粗牙机械螺丝Coarse machine screws 幼牙机械螺丝Fine machine screws 2. 自攻螺丝Self tapping screws 三角机牙螺丝Taptite-S Type 三角自攻B型Taptite-B Type 三角自攻C型Taptite-C Type 三角自攻P型Taptite-P Type 木牙螺丝Wood screws 高低纹螺丝Hi-Lo screws 3. 螺丝头型Screw Heads 切六角头Hexagonal head 打六角头Indented hexagonal head 四方头Square head 盆头Pan head 圆头Round head 沉头Flat/Countersunk head 扁圆沉头Oval head 扁圆头Truss head 盆圆头Binding head 圆顶平头Fillister head
4. 螺丝槽型Screw inserts 十字槽Cross recessed drives/Philips recess 米字槽PZ Drives 一字槽Slotted Drives 一字/十字槽slotted & Philip combination 内六角扁圆头Hexagonal socket button cap 内六角杯头Hexagonal socket head cap 方插口Square socket 凹穴六角Indented hexagon 梅花及梅花针槽Torx and TX tamper resistant 5. 螺母Nuts 六角螺母Hexagonal nuts 四方螺母Square nuts 高扭力六角螺母Prevailing torque hex..nuts 圆顶螺母cap nuts 法兰螺母Flange nuts 蝶形螺母Wing nuts 6. 锅钉Rivets 尾孔锅钉Semi-tubular rivets 冷间锻造锅钉Cold headed rivets 拉钉Pop/blind rivets 7. 垫圈/介子Washers 平面介子Plain washers
标准件中英文对照知识
常用钢材理论重量表 [2004-12-22 8:51:47] 计算公式： t（重量kg) = A(断面积mm²)×L(长度m) ×p(密度g/cm³) ×1/1000 注：(1) 型材制造中有允许偏差值，故上式只做估算之用。 (2) 关于p值,钢材通常取7.85 . 螺丝产品名称中英文对照（台湾版）螺丝螺 [2004-12-22 8:51:24] 六角螺絲(栓) HEX HEAD CAP SCREWS(HEX BOLTS) 六角機械螺絲HEX HEAD MACHINE BOLTS 六角木牙螺絲HEX LAG BOLTS 四角螺絲SQUARE HEAD BOLTS T頭螺絲T HEAD BOLTS 馬車螺絲CARRIAGE BOLTS 環首螺絲EYE BOLTS 內六角孔螺絲HEX SOCKET CAP SCREWS 固定螺絲SET SCREWS 螺椿栓STUD BOLTS 螺旋椿SCREW STUDS 輪殼螺栓WHEEL BOLTS 翼形螺絲WING SCREWS 自攻螺絲SELF TAPPING SCREWS 自削螺絲THREAD CUTTING SCREWS 鑽尾螺絲SELF DRILLING SCREWS 旋入螺絲DRIVE SCREWS 機械螺絲MACHINE SCREWS 木螺絲WOOD SCREWS 家具螺絲FURNITURE SCREWS 塑板螺絲CHIPBOARD SCREWS 牆用螺絲DRYWALL SCREWS 基礎螺栓FOUNDATION BOLTS U型螺栓U BOLTS 勾頭螺栓HOOK BOLTS 套掛螺絲TOGGLE BOLTS 突緣螺絲FLANGE BOLTS 軌道螺栓(魚尾螺絲) TRACK BOLTS 耐候鋼螺絲CORTEN STEEL HEA VY HEX BOLTS 扭矩控制螺栓T.C.BOLTS
haso标准件中英文对照
HASCO Z标准件系列 Z00 导柱Guide pillar Z01 导柱Guide pillar Z011 导柱Guide pillar Z012 导柱Guide pillar Z013 导柱Guide pillar Z014 导柱Guide pillar Z0141 导柱连接端End piece Z0142 导柱连接端End piece Z015 导柱Guide pillar Z0151 导柱连接端(Z015/…专用)Pillar adapter Z0152 导柱连接端Pillar adapter Z02 顶杆Ejector rod Z022 导管Guide sleeve Z03 导柱Guide pillar Z05 圆锥形管精定位Locating unit, round Z055 圆形垫片Spacer Z056 圆形垫件Spacer Z06 平锥形导块Locating unit Z07 长方形导块Square guide bar Z08 直身方形管位导块Pre-centering unit Z081 方形垫片Spacer disc Z091 方形定位锁块(公)Square interlock Z092 方形定位锁块(母)Square interlock Z093 方形定位锁块(母)Square interlock Z10 导套Guide bush Z10W 自润滑导套Guide bush Z11 导套Guide bush Z11W 自润滑导套Guide bush Z12 滚珠导套Ball guide bush Z13W 自润滑导套Self lubric.Guide bush Z15W 自润滑垫片Self lubric. Flat stock Z16W 自润滑垫片Self lubric. Guide rail Z17 长方形导块(Z07/...专用)Guide retainer Z20 定板导套Centering sleeve Z25 定位销Dowel pin Z26 定位销Dowel pin Z28 六角螺母Hexagon nut Z281 六角螺母Hexagon nut Z282 六角螺母Hexagon nut Z285 螺母Nut for T-slots Z286 螺母Nut for T-slots Z30 胚头内六角螺丝Socket head cap screw
紧固件标准中英文对照表
1DIN1圆锥销taper pins ISO2339GB117 2DIN7圆柱销parallel pins ISO2338GB119-86 3DIN84开槽圆柱头螺钉slotted cheese head screws ISO1207GB65-85 4DIN85开槽盘头螺钉slotted pan head screws ISO1580GB67-85 5DIN93单耳止动垫圈tab washers GB854 6DIN94开口销split cotter pins ISO1234GB91 7DIN95开槽半沉头木螺钉slotted raised csk head wood screws GB101 8DIN96开槽半圆头木螺钉slotted round head wood screws GB99 9DIN97开槽沉头木螺钉slotted countersunk head wood screws GB100 10DIN125-A平垫plain washers ISO7089GB97.1-85 11DIN125-B平垫(带倒角)mediun washers ISO7090GB97.2-85 12DIN126平垫plain washers ISO7091 13DIN127-A重型弹垫spring lock washers,tang ends GB7244 14DIN127-B标准弹垫spring lock washers,square ends GB93-87 15DIN128-A鞍形弹垫single coil spring lock washers GB7245-87 16DIN137-A弹簧止动垫圈curved spring washers 17DIN137-B波形弹垫wave spring washers GB955 18DIN186T型方颈螺栓T-head bolts with square neck GB37-88 19DIN188T型双接头螺栓T-head bolts with double nip 20DIN258螺纹圆锥销taper pins with threaded end ISO8737 21DIN261T型头螺栓T-head bolts 22DIN315AF蝶型螺母(美制)wing nuts amercia form 23DIN315DF蝶型螺母(德制)wing nuts germany form GB62-88 24DIN316AF蝶型螺钉(美制)wing screws amercia form 25DIN317DF蝶型螺钉(德制)wing screws germany form 26DIN319圆球型盖型螺母ball knobs 27DIN404开槽带孔球面圆柱头螺钉slotted capstan screws GB832-88 28DIN417开槽长圆柱端紧定螺钉slotted set srews with full dog point ISO7435GB75-85 29DIN427开槽平端紧定螺钉(半牙)slotted set srews with chamfered end ISO2342GB73-85 30DIN431小六角特薄细牙螺母pipe nuts with thread GB808-88 31DIN432外舌止动垫圈external tap GB856-88 32DIN433小垫圈(用于圆柱头螺钉)washers for cheese head screws ISO7092GB848-95 33DIN434方斜垫圈(U型)square taper washers for U-section GB852-88 34DIN435方斜垫圈(I型)square taper washers for I-sections GB852-88 35DIN436方垫圈square washers 36DIN438开槽凹端紧定螺钉slotted set with cup point ISO7436GB74-85 37DIN439六角薄螺母hexagon thin nuts ISO4035GB6172-86 38DIN439细牙六角薄螺母hexagon thin nuts ISO8675GB6173-86 39DIN440木螺钉专用垫圈rounds washers for wood constructions ISO7094 40DIN443密封帽sealing caps,push-in type 41DIN444活节螺栓B 型eye bolts form B GB798-88 42DIN462内舌止动垫圈internal tab washers 43DIN463双耳止动垫圈washers with two taps GB855-88
螺丝产品名称中英文对照
六角螺丝(栓) HEX HEAD CAP SCREWS(HEX BOLTS) 六角机械螺丝HEX HEAD MACHINE BOLTS 六角木牙螺丝HEX LAG BOLTS 四角螺丝SQUARE HEAD BOLTS T头螺丝T HEAD BOLTS 马车螺丝CARRIAGE BOLTS 环首螺丝EYE BOLTS 内六角孔螺丝HEX SOCKET CAP SCREWS 固定螺丝SET SCREWS 螺椿栓STUD BOLTS 螺旋椿SCREW STUDS 轮壳螺栓WHEEL BOLTS 翼形螺丝WING SCREWS 自攻螺丝SELF TAPPING SCREWS 自削螺丝THREAD CUTTING SCREWS 钻尾螺丝SELF DRILLING SCREWS 旋入螺丝DRIVE SCREWS 机械螺丝MACHINE SCREWS 木螺丝WOOD SCREWS 家具螺丝FURNITURE SCREWS 塑板螺丝CHIPBOARD SCREWS 墙用螺丝DRYWALL SCREWS 基础螺栓FOUNDATION BOLTS U型螺栓U BOLTS 勾头螺栓HOOK BOLTS 套挂螺丝TOGGLE BOLTS 突缘螺丝FLANGE BOLTS 轨道螺栓(鱼尾螺丝) TRACK BOLTS 耐候钢螺丝CORTEN STEEL HEA VY HEX BOLTS 扭矩控制螺栓T.C.BOLTS 高张力螺栓HIGH STRENGTH BOLTS 剪力钉(焊接螺丝) WELDING STUDS 螺丝附华司组合SCREWS AND WASHERS ASSEMBLED(SEMS) 大尺寸螺栓BIG SIZE BOLTS 不锈钢小螺丝STAINLESS STEEL SHEET METAL SCREWS 不锈钢大螺丝STAINLESS STEEL BOLTS 铜螺丝BRASS SCREWS 铝螺丝ALUMINUM SCREWS 合金钢螺丝ALLOY STEEL SCREWS 电子螺丝ELECTRONIC SCREWS 微小精密螺丝MICRO SCREWS 塑料螺丝PLASTIC SCREWS 复合材料用螺丝PARTICLE BOARD SCREWS 钛合金螺丝TITANIUM ALLOY BOLTS
螺丝相关中英文对照表
螺絲相關中英文對照表 中文名稱英文名稱 六角螺絲（栓）HEX HEAD CAP SCREWS(HEX BOLTS) 六角機械螺絲HEX HEAD MACHINE BOLTS 六角木牙螺絲 HEX LAG BOLTS 四角螺絲SQUARE HEAD BOLTS T 頭螺絲T HEAD BOLTS 馬車螺絲CARRIAGE BOLTS 環首螺絲EYE BOLTS 內六角孔螺絲HEX SOCKET CAP SCREWS 固定螺絲SET SCREWS 螺椿栓STUD BOLTS 螺旋椿SCREW STUDS 輪殼螺栓WHEEL BOLTS 翼形螺絲WING SCREWS 自攻螺絲SELF TAPPING SCREWS 自削螺絲THREAD CUTTING SCREWS 鑽尾螺絲SELF DRILLING SCREWS 旋入螺絲DRIVE SCREWS 機械螺絲MACHINE SCREWS 木螺絲WOOD SCREWS 家具螺絲FURNITURE SCREWS 塑板螺絲CHIPBOARD SCREWS 牆用螺絲DRYWALL SCREWS 基礎螺栓FOUNDATION BOLTS U 型螺栓U BOLTS 勾頭螺栓HOOK BOLTS 套掛螺絲TOGGLE BOLTS 突緣螺絲 FLANGE BOLTS 軌道螺栓（魚尾螺絲）TRACK BOLTS 耐候鋼螺絲CORTEN STEEL HEAVY HEX BOLTS 扭矩控制螺栓T.C.BOLTS 高張力螺栓HIGH STRENGTH BOLTS 剪力釘（焊接螺絲）WELDING STUDS
螺絲附華司組合SCREWS AND WASHERS ASSEMBLED(SEMS) 大尺寸螺栓BIG SIZE BOLTS 不鏽鋼小螺絲STAINLESS STEEL SHEET METAL SCREWS 不鏽鋼大螺絲STAINLESS STEEL BOLTS 銅螺絲BRASS SCREWS 鋁螺絲ALUMINUM SCREWS 合金鋼螺絲ALLOY STEEL SCREWS 電子螺絲ELECTRONIC SCREWS 微小精密螺絲MICRO SCREWS 塑膠螺絲PLASTIC SCREWS 復合材料用螺絲PARTICLE BOARD SCREWS 鈦合金螺絲TITANIUM ALLOY BOLTS 鈦、鋯、鉬、鈮等螺絲、零件、 材料TI,ZR,MO,NB PARE METAL BOLTS PARTS 拇指螺絲 THUMB SCREWS 雙頭牙螺絲DOUBLE END SCREWS HANGER BOLT 車輛（汽車）螺絲、螺帽AUTOMOTIVE FASTENERS 航太用螺絲AEROSPACE FASTENERS 飛機特殊扣件SOURCE CONTROL BOLTS 拉栓BLIND BOLTS 面板螺絲PANEL FASTENERS 電梯螺絲ELEVATOR BOLTS 四角頭固定螺絲SQUARE SET SCREWS 大頭馬車螺絲STEP BOLTS 單向螺絲ONE WAY LAG SCREWS 管夾螺絲HOSE CLAMP SCREWS 不鏽鋼固定螺絲不鏽鋼內六角螺絲鉸鏈螺絲STAINLESS STEEL HEX SOCKET CAP SCREWS STAINLESS STEEL HEX SOCKET CAP SCREWS HINGE SCREWS 貨櫃螺絲CONTAINER SCREWS 復合材料鑽尾螺絲BI-METAL SELF DRILLING SCREWS 三角牙螺絲TRILOBULAR THREAD SCREWS
螺丝中英文对照1
紧固件中英文对照(紧固件常用产品和常用语) 紧固件fastener 2009-10-15 11:52:30 阅读33 评论0字号：大中小 紧固件中英文对照(紧固件常用产品和常用语) 紧固件中英文对照紧固件标准名称 紧固件标准(常用的是德标和美标) GB（国标）ISO(国际标准) DIN（德制）JIS（日标） ANSI/ASME（AmericanNationalStandardsInstitute–ANSI； AmericanSocietyOfMechanicalEngineers–ASME）（美标） BS（英制）IFI=IndustrialFastenerInstitute是美国工业紧固件协会的标准BA（英制）常见螺纹">螺纹中英文对照 M.MF(公制牙) UNC.（美制粗牙） UNF(美制细牙) UNEF(美制超细牙) B.S.W.标准惠氏粗牙系列，一般用途圆柱螺纹(英制牙) B.S.F.标准惠氏细牙系列，一般用途圆柱螺纹(英制牙) finepitchthread细牙 fullthread全螺纹 螺丝头型 IHH=indhexhead锯六角头 PH=phillips十字槽 Pan圆头(盘头) Oval半沉头 H.W.H..六角小法兰 H.W.F.六角大法兰 CSK沙拉头(沉头)
Largewafer大扁平头 Bugle喇叭头 Truss盘头带垫 Pozi米制槽 Serra-tion垫下带花 FlowerHead开花头 6-bobesrecess内梅花 Cuphead杯头 常见紧固件产品名称 splitwasher弹簧垫片（一般厂家会管washer叫“华司”） flatwasher平垫片 Selftappingscrew自攻螺丝 Selfdrillingscrew自钻螺丝 drywallscrew干墙螺丝/干壁螺丝/墙用螺丝 highlowscrew高低牙螺丝 collatedscrew链带螺丝 Concretescrew水泥螺丝 Tri-lobularthreadscrew三角螺丝 kepnut锁紧螺母 acornnut盖形螺母 wingwasher翼型垫片 eyebolt吊环螺栓（也叫环首螺栓，其实这个叫法很多，大概是不同地区的缘故）Pistonbolt活塞螺钉 Windingbolt线圈螺钉 Hexagonheadbolts六角头螺栓 Hexagonflangebolts六角法兰螺栓 Carriagebolt马车螺栓 Squareheadbolt方头螺栓 Flatcountersinksquareneckbolts沉头方颈螺栓
最全紧固件中英文对照
最全緊固件中英文對照，外貿必備詞典！ 一、緊固件 Fasteners 標準緊固件 Standard Fasteners 非標準緊固件 Nonstandard Fasteners 特殊緊固件 Special Fasteners 汽車緊固件 Automotive Fasteners 銅制緊固件 Brass Fasteners 航天用緊固件 Aerospace Fasteners 精密緊固件 Precision Fasteners 化學緊固件 Chemical Fasteners 摩托車緊固件 Motorcycle Fasteners 不銹鋼緊固件 Stainless Steel Fasteners 鐵道緊固件 Railway Fasteners 防松緊固件 Self-locking Fasteners 高強度緊固件 High strength Fasteners PEM緊固件 PEM Fasteners 鋼結構緊固件 Steel Structural Fasteners 壓鉚緊固件 Self-Clinching Fasteners 鋁制緊固件 Aluminum Fasteners 鈦合金緊固件 Titanium Alloy Fasteners 尼龍緊固件 Nylon Fasteners 精制緊固件 Finished Fastener 粗制緊固件 Unfinished Fastener 螺紋緊固件 Threaded Fastener 半精制緊固件 Semi-Finished Fastener 抗剪緊固件 Shear Fastener 抗拉緊固件 Tension Fastener 面板緊固件 Panel Fasteners 二、螺栓 Bolts 六角頭螺栓Hexagon Head Bolts 六角法蘭面螺栓Hexagon Flange Bolts 軌道螺栓（魚尾螺絲）Track Bolts 高強度螺栓 High Strength Bolts 地腳螺栓Eyelet Bolts 馬車螺栓 Carriage Bolts 護攔螺栓 Guardrail Bots 焊接螺栓 Weld Bolts 雙頭螺栓 Double End Bolts 鋼結構連接副 Structural Bolting 內六角螺栓 Hex Socket Bolts 合金鋼螺栓 Alloy Steel Bolts 方頭螺栓 Square Head Bolts/Square Bolts 鉤頭螺栓 Hook Bolts 不銹鋼螺栓 Stainless steel Bolts
供应商选择和管理程序-中英文对照
供应商选择和管理程序-中英文对照
————————————————————————————————作者：————————————————————————————————日期：
XXX Supplier Selection and Management Procedure 供应商选择和管理程序 Checked by/校准：Approved by/批准：Doc. No./文件编号：Ver. No./版本号：
XXX Checked by/校准： Approved by/批准： Doc. No./文件编号： Ver. No./版本号： Audit and Approval 审核及批准 Audit and Approval 审核及批准 Signature 签 字 Date 日 期 Remark 备 注 General Manager 总经理 √ Production Dept 制造部 √ R&D Dept. 产品开发部 √ Quality Dept. 质量部 √ Purchasing Dept. 采购部 √ Finance Dept. 财务部 √ HR Dept. 人力资源部 Sales Dept. 销售部
XXX 1 Purpose 目的： To define the methodology to select, assess, approve new suppliers and manage supplier to ensure uniformity across the group and that all purchased product conforms to the purchase requirements of NAILI. 定义如何选择、评估、批准和管理供应商。 2 Scope 范围： All parts and services contribute to products that sold to Customers including Raw material, Subcontracting parts, Services and Other Products. 所有作用于销售给客户产品的原材料、零部件和服务，包括外包合同、零件、服 务和其他的产品。 3 Definition定义： None 无 4. Responsibility职责: Purchasing department is responsible for sourcing, preliminarily assessing, recommending, auditing, manage new suppliers and steer price determination. 采购部负责寻找,初评,推荐,审核,管理供应商及跟进价格确认流程。 R&D department is responsible for audit new suppliers to confirm their technical capability. 产品开发部负责审核新供应商以确认其技术能力. Quality department is responsible for preliminarily assessing, audit new suppliers to confirm their quality assurance capability and incoming control。 质量部负责初评,审核新供应商,确认其品质保证能力及来料控制. 5. Procedure内容: 5.1 New supplier development 5.1.1 Sourcing for new supplier寻找新供应商 5.1.1.1Purchasing department gets purchasing request and needs for new supplier. All departments can request a need. 采购部得到采购需求，需要发展新供应商。公司任何部门都可以提出采购需求。Checked by/校准：Approved by/批准：Doc. No./文件编号：Ver. No./版本号：