Bolts Screws
Studs
Nuts
Washer
s
Set
Screws Tappin
g Screws
Pins Keys
Ret
ain ing Insert s
Rivets
等效等效参考
参考参考参考参考
下列表中DIN 标准和NON 标准没有填写的部分是与国标没有相应的对应关系;参考部分不能完全替代,设计者可根据设计要求进行选择。
ISO4014 - Hexagon head bolts
DIN7968 - Hexagon fit bolts for structural steel bolting
DIN7969 - Slotted countersunk head fit bolts for structural steel bolting DIN6921 - Hexagon flange bolts DIN580 - Lifting eyebolts
ISO8765 - Hexagon head bolts, with fine pitch thr DIN609 - Hexagon fit bolts
DIN444 - Eyebolts DIN603 - Round head square neck bolts GB/T5787-86GB/T14-98GB798-88 GB/T5782-2000
GB/T5785-2000
GB27-88
GB825-88
等效等效等效等效
等效
等效等效
等效
参考等效
等效
参考等效等效
GB/T67-2000GB/T68-2000
GB/T5783-2000GB/T5786-2000
GB/T70.1-2000
GB6191-86GB5281-85
GB/T70.2-2000GB2673-86六角头螺栓,全螺纹
ISO2009 - Slotted csunk head screws
NON1241 - Hexagon head screws, with serrated flange
ISO4762 - Hexagon socket head cap screws
DIN7984 - Hexagon socket thin head cap screws ISO7379 - Hexagon socket head shoulder screws ISO7380 - Hexagon socket button head screws DIN7991 - Hexagon socket flat head screws ISO1580 - Slotted pan head screws ISO4017 - Hexagon head screws
ISO8676 - Hexagon head screws, with fine pitch thread
GB/T818-2000GB/T819.1-2000GB/T820-2000ISO7045 - Crossed recessed pan head screws ISO7046 - Crossed recessed csunk flat head screws
ISO7047 - Crossed recessed raised csunk head screws
ISO4018 - Hexagon head screws
GB/T5781-2000
六角头螺栓
ISO4014 - Hexagon head screws
GB/T5782-2000
等效等效
参考
参考参考参考
参考参考参考
GB897-88GB897-88GB15389-94
GB902.2-89GB902.3-89
GB902.3-89
GB834-88
GB/T65-2000
GB/T69-2000DIN316 - Wing screws
NON1243 - Crossed recessed pan head screws
DIN464 - Knurled thumb screws ISO2010 - Slotted raised csunk head screws ISO1207 - Slotted cheese head screws
DIN921 - Slotted pan head screws with large head
DIN939 - Studs (with interference thread)DIN975 - Threaded rod
DIN939FO - Studs (without interference
thread)
NON9801 - Self-clinching studs
NON9802 - Self-clinching standoffs, blind NON9804 - Self-clinching studs for PC boards NON9803 - Self-clinching standoffs, thru-hole DIN32500P - Threaded studs for stud welding,non-flanged
DIN32501GA - Threaded studs for stud welding,
tip ignition
DIN32501SIA - Internal threaded studs for stud welding, tip ignition
等效等效等效等效等效
参考参考参考参考参考参考参考等效等效
GB/T6172.1-2000GB/T6177.1-2000GB825-88GB/T6171-2000GB62-88GB39-88GB/T13681-92GB/T889.1-2000
GB/T6185.1-2000
GB/T6173-2000
GB/T6178-86GB923-88GB805-88ISO7040 - Prevailing torque hexagon nuts with
non-metallic inserts
DIN582 - Lifting eye nuts DIN315 - Wing nuts ISO7042 - Prevailing torque all-metal hexagon
nuts
ISO4035 - Hexagon thin nuts ISO4161 - Hexagon nuts with flange ISO8673 - Hexagon nuts with fine pitch threads
ISO8675 - Hexagon thin nuts with fine pitch threads
NON7201 - Hexagon nuts with serrated flange DIN555 - Hexagon nuts (Nylon)DIN935 - Hexagon castle nuts ISO4032 - Hexagon nuts GB/T6170-2000DIN917 - Hexagon cap nuts DIN7967 - Self-locking (PAL) nuts DIN562 - Flat square nuts DIN929 - Hexagon weld nuts
等效等效
参考
参考
参考
参考
参考
GB/T6184-2000
GB/T6183.1-2000
NON7208 - Self-clinching nuts NON7206 - Rivet nuts
NON7207 - Self-clinching nuts for printed circuit boards
ISO7719 - Prevailing torque all-metal hexagon
nuts
ISO7043 - Prevailing torque hex nuts w/flange and non-metallic inserts
NON7205 - Self-clinching nuts
DIN508 - T-nuts
NON7202 - Hexagon lock nuts with attached conical spring washers
DIN128A - Curved spring lock washers
GB955-87DIN434 - Square beveled washers for channels
(8%)
NON7203 - Hexagon lock nuts with lock washers NON7204 - Hexagon lock nuts with conical spring washers
DIN435 - Square beveled washers for I-beams (14%)
GB853-88
GB852-88GB7245-87DIN127 - Helical spring lock washers DIN137 - Spring washers, wavy GB93-87
参考
参考
参考
等效
等效
参考
参考
参考
参考
参考
GB854-88GB/T97.1-2002GB/T96.1-2002GB/T96.2-2002
GB/T97.2-2002DIN432 - Locking tab washers DIN7349 - Plain washers, thick
DIN93 - Tab washers with long tabs ISO7416 - High-strength structural washers DIN463 - Tab washers with long and short tabs GB96-85GB855-88DIN7989A - Plain washers for steel construction
GB856-88ISO7089 - Plain washers - normal series ISO7093 - Plain washers - large series DIN2093 - Disc springs
DIN6797A - External tooth lock washers washers
DIN6797J - Internal tooth lock washers washers
DIN6798A - External serrated lock washers NON1301 - Internal tooth lock washers (cupped)
NON1302 - Internal/external serrated lock washers
GB862.1-87GB861.1-87GB861.2-87DIN6796 - Conical spring washers
参考
等效
等效
等效
等效
等效
等效
等效
等效
等效
等效
GB845-85
GB846-85GB847-85GB/T80-2000GB71-85GB849-88GB850-88
ISO7434 - Slotted set screws with cone point GB73-85GB5285-85ISO7051 - Crossed recessed raised csunk head tapping screws
ISO1479 - Hexagon head tapping screws
ISO7049 - Crossed recessed pan head tapping screws
ISO7050 - Crossed recessed countersunk flat head tapping screws
ISO4766 - Slotted set screws with flat point DIN5419 - Felt rings ISO4029 - Hexagon socket set screws with cup point
ISO4028 - Hexagon socket set screws with dog point
ISO4026 - Hexagon socket set screws with flat
point
ISO4027 - Hexagon socket set screws with cone
point
DIN6319C - Spherical washers DIN6319G - Conical seats
GB/T77-2000
GB/T78-2000
GB/T79-2000
等效
等效
等效
参考
参考
参考
参考
参考
参考
参考
参考参考
TYPE B w/ split pin hole
GB880-86GB951-86TYPE A w/o split pin hole
GB/T5856.1-95
GB/T15856.4-95GB/T15856.2-95GB5282-85GB5283-85GB6563-86GB6561-86GB6560-86GB5284-85ISO2340 - Clevis pins, without head
NON1242 - Crossed recessed oval head thread rolling screws
DIN7504N - Crossed recessed pan head self-drilling screws
DIN7504K - Hexagon head self-drilling screws DIN7504P - Crossed recessed countersunk head self-drilling screws
ISO1483 - Slotted raised countersunk head tapping screws
DIN7500C - Crossed recessed pan head thread rolling screws
DIN7500D - Hexagon head thread rolling screws DIN7500M - Crossed recessed countersunk head thread rolling screws
DIN7997 - Crossed recessed countersunk head wood screws
ISO1481 - Slotted pan head tapping screws ISO1482 - Slotted countersunk head tapping screws
GB882-86
ISO2341 - Clevis pins, with head
参考
等效
等效
等效
等效
等效
等效
等效
等效
等效
DIN1434 - Clevis pins, with head
(DIN1434 has been cancelled, superseded by ISO2341)
GB882-86
TYPE A w/o split pin hole
TYPE B w/ split pin hole
ISO8748 - Spring-type straight pins coiled,heavy duty
ISO8750 - Spring-type straight pins coiled,standard duty
ISO8740 - Grooved pins, full-length parallel grooved with chamfer
ISO8741 - Grooved pins, half-length reverse taper grooved
ISO8745 - Grooved pins, half-length taper grooved
ISO8752 - Spring-type straight pins, slotted GB/T879.4-2000GB/T13829.1-92(TYPEB)GB/T13829.2-92(TYPEC)NON8101 - Spring-type straight pins, with serrated slot
TYPE A
TYPE B
ISO2338 - Parallel pins, unhardened
TYPE A
ISO2339 - Taper pins, unhardened
GB/T117-2000
ISO8744 - Grooved pins, full-length taper grooved
GB/T119.1-2000
GB/T879.3-2000
GB/T13829.2-92(TYPEA)GB/T13829.2-92(TYPEB)GB/T879-2000
等效
参考
等效
参考
参考
参考
参考
DIN6325 - Parallel pins, hardened (Dowel pins)
ISO8737 - Taper pins with external thread,unhardened
GB/T881-2000
GB119.2-2000
GB/T91-2000
ISO1234 - Split pins TYPE B
Keys
GB/T1565-1979
DIN6887 - Taper keys with gib head DIN6888 - Woodruff keys GB/T1096-1979
GB/T1564-1979
DIN6885 - Rectangular or square parallel keys TYPE A
TYPE B
DIN6886 - Taper keys TYPE A
TYPE B
GB/T1099-1979
Retaining Rings
参考参考参考参考DIN471 - Retaining rings for shafts, normal duty DIN472 - Retaining rings for bores, normal
duty
GB894.2-86GB893.2-86NON25101 - Helical coil inserts
DIN6799 - Circlips DIN988 - Shim rings and Supporting rings
GB896-86 DIN660 - Round head rivets
GB867-86DIN16903 - Insert nuts for plastic moldings
C级