ADNS-5100/ADNS-5100-001
Solid-State Optical Mouse Lens
Data Sheet
Description
The ADNS-5100 and ADNS-5100-001 Solid-State Optical Mouse Lenses are designed for use with the ADNS-5XXX
series of Avago Technologies Optical Mouse Sensors. The optical system is completed with the illumination subsystem provided by the ADNS-5200 LED Assembly Clip and the HLMP-ED80-XX000 LED. Together with the LED, the ADNS-5100 and ADNS-5100-001 provides the directed illumination and optical imaging necessary for proper operation of the Optical Mouse Sensor. The lenses are precision molded optical components and should be handled with care to avoid scratching of the optical surfaces.
Outline Drawings Including Markings and Logos ADNS-5100
Flange Part Number Material Round ADNS-5100Polycarbonate or
Polystyrene HH30 Trim ADNS-5100-001Polycarbonate or
Polystyrene HH30 Ordering Information
Specify Part Number as follows:
Figure 1. ADNS-5100 Solid State Optical Mouse Round Lens outline drawing and detail
Outline Drawings Including Markings and Logos
ADNS-5100-001
Figure 2. ADNS-5100-001 Solid State Optical Mouse Trim Lens outline drawing and detail
Mechanical Assemble Requirements
All specifications reference Figure 3, Optical System Assembly Diagram
Lens Design Optical Performance Specifications
All specifications are based on the Mechanical Assembly Requirements.
Symbol
Min.Typical Max.Units
Conditions
Numerical Aperture NA
0.1
0.130.16
Magnification 1. 5Image at nominal location
Design Wavelength 639nm Object to Image Distance 8.83mm
Lens Material*Index of Refraction N 1.580
1.58 1.5840
l = 639nm
Depth of Field DOF
±0.5mm Die Coverage Radius
0.6
mm Symbol
Min.Typical Max.Units Conditions
Distance from Object Surface to Lens Reference Plane
A .3
.4 .5
mm Distance from Mouse Sensor Lid contact with lens Surface to Object Surface
B
7.38
mm
Sensor lid must be in contact with lens housing surface *Lens material is polycarbonate or polystyrene HH30, therefore, cyanoacrylate based adhesives should not be used as they will cause lens material deformation.
Figure 3. Optical System Assembly Diagram
For product information and a complete list of distributors, please go to our web site: https://www.sodocs.net/doc/e614395628.html,
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.Data subject to change. Copyright ? 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0086EN AV02-0115EN
- July 31, 2007
Figure 4. Illustration of base plate mounting features
Mounting Instructions for the ADNS-5100 Lens to the Base Plate
An IGES format drawing file with design specifications for mouse base plate features is available.
Note :- Stand-off of the base plate shall not be larger than 5mm as lens surface 7 size is 5.60mm.”
These features are useful in maintaining proper positioning and alignment of the ADNS-5100 when used with the Avago Technologies Optical Mouse Sensor. This file can be obtained by contacting your local Avago Technologies sales representative.