搜档网
当前位置:搜档网 › 01_Test_Sheet_B

01_Test_Sheet_B

01_Test_Sheet_B
01_Test_Sheet_B

1.In which of the answers are the aggregates named which belong to

the power transmission of a vehicle? Which construction compo-nents are necessary to mount the engine lateral to the driving direc-tion in front wheel drive vehicles a.)Guaranties the adhesion between the tyre and the road

b.)Transformation and conversion of torsional moment

c.)Absorption of vibrations

d.)Increscent of the engine revolutions

2.Which construction components are necessary to mount the engine

lateral to the driving direction in front wheel drive vehicles

a.)Driving shaft lateral to the driving direction

b.)Cardan shaft in the driving direction

c.)Differential gearing

d.)Spur gear axle gearing

3.Which statement for clutch is correct? a.)Engine torsional moment and increscent of the engine revolutions

b.)increscent of the engine revolutions, absorption of the rotational vibrations

c.)Direction change of the distribution forces , increscent of the engine

revolutions

d.)transformation of the engine revolutions, allow a supple drive away

4.On which component is the clutch cover mounted? a.)Crank shaft

b.)Gearbox output shaft

c.)shifter

d.)Fly wheel

a.)Sliding friction

5.Which type of friction is effective with a clutched running clutch in

an oil bath?

b.)Rolling friction

c.)Adhesive friction

d.)Fluid friction

a.)They deliver insufficient torsional moment in the higher revolution range

6.Why does the turning moment of a combustion engine have to be

converted?

b.)They deliver too many torsional moments in the lower revolution range

c.)The capacity and torsional moment have to be unilateral to each other

d.)They only deliver a minimum and a maximal rotational moment in a

limited torsional moment

7.Why are slanted cog wheels used in a change speed gearbox? a.)They allow themselves to be changed easier

b.)They are cheaper to manufacture

c.)They run with less noise

d.)They are easier to change

8.Which statement relates to a uniform axle switching bush gearbox? a.)The gear wheels which are changed run loosely on the shaft

b.)The switching bushes on the counter shaft can be moved axial

c.)The gear wheels which have to be changed are moved axial on the main

shaft

d.)The gear wheels which have to be changed are connected torsion fest

with the counter shaft

a.)Driving shaft, counter shaft, all gear wheels on the main shaft

9.Which parts rotate in a fully synchronised change speed gearbox

engine when it is running?

b.)Driving shaft, counter shaft, gearbox main shaft

c.)Driving shaft, counter shaft, return shaft

d.)Driving shaft, gearbox output shaft, all gear wheels on the main shaft

10.From which construction components are a staged fully automatic

gearbox consisted? a.)Hydro dynamical torsional moment converter, separation clutch, change

speed gearbox

b.)separation clutch, planetary gearbox, hydraulic controlling

c.)Hydro dynamical torsional moment converter, planetary gearbox, hydrau-

lic controlling

d.)Converter clutch, planetary gearbox, hydraulic controlling

11.With a connected by pass clutch, the hydrodynamic turning mo-

ment converter a.)Pump wheel and turbine wheel are connected torsional fest with each

other

b.)Turbine wheel and guide wheel connection

c.)Pump wheel and guide wheel connection

d.)The blockage of the freewheel of the guide wheel

12.Which synchronise joint allows the greatest deflection angle? a.)Homokinetical joint

b.)Universal joint shaft

c.)Ball and socket joint

d.)Fabric washers

13.Tripod joints are a.)Homokinetical joint

b.)Ball and socket joint

c.)Synchronic running slip joint

d.)Synchronic running fixed joint

14.How can a Gleason teething on the crown wheel be recognised? a.)The back of the tooth is wider on the inside as the outside

b.)The height of the teeth and the width of the teeth are uniform inside and

outside

c.)The height of the teeth and the width of the teeth are smaller outside than

inside

d.) The height and width of the back of the teeth are larger outside than

inside

15.…., rotate in the differential during curving a.)Only the outer curve axle shaft wheels

b.)Only the compensating wheels

c.)All of the bevel gear

d.)Only the axle shaft wheels

相关主题