当前位置：搜档网 › MAX4051AESE+T中文资料

MAX4051AESE+T中文资料

General Description

The MAX4051/MAX4052/MAX4053 and MAX4051A/MAX4052A/MAX4053A are low-voltage, CMOS analog ICs configured as an 8-channel multiplexer (MAX4051/A),two 4-channel multiplexers (MAX4052/A), and three sin-gle-pole/double-throw (SPDT) switches (MAX4053/A).The A-suffix parts are fully characterized for on-resistance match, on-resistance flatness, and low leakage.

These CMOS devices can operate continuously with dual power supplies ranging from ±2.7V to ±8V or a single supply between +2.7V and +16V. Each switch can handle rail-to-rail analog signals. The off-leakage current is only 0.1nA at +25°C or 5nA at +85°C (MAX4051A/MAX4052A/MAX4053A).

All digital inputs have 0.8V to 2.4V logic thresholds,ensuring TTL/CMOS-logic compatibility when using ±5V or a single +5V supply.

________________________Applications

Battery-Operated Equipment Audio and Video Signal Routing Low-Voltage Data-Acquisition Systems Communications Circuits

____________________________Features

?Pin Compatible with Industry-Standard

74HC4051/74HC4052/74HC4053?Guaranteed On-Resistance:

100?with ±5V Supplies

?Guaranteed Match Between Channels:

6?(MAX4051A–MAX4053A)12?(MAX4051–MAX4053)?Guaranteed Low Off-Leakage Currents:

0.1nA at +25°C (MAX4051A–MAX4053A)1nA at +25°C (MAX4051–MAX4053)?Guaranteed Low On-Leakage Currents:

0.1nA at +25°C (MAX4051A–MAX4053A)1nA at +25°C (MAX4051–MAX4053)?Single-Supply Operation from +2.0V to +16V Dual-Supply Operation from ±2.7V to ±8V ?TTL/CMOS-Logic Compatible ?Low Distortion: < 0.04% (600?)?Low Crosstalk: < -90dB (50?)?High Off-Isolation: < -90dB (50?)

MAX4051/A, MAX4052/A, MAX4053/A

Low-Voltage, CMOS Analog

Multiplexers/Switches

________________________________________________________________Maxim Integrated Products

___________________________________Pin Configurations/Functional Diagrams

19-0463; Rev 2; 10/05

Ordering Information continued at end of data sheet.

For pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at 1-888-629-4642, or visit Maxim’s website at https://www.sodocs.net/doc/ba14686102.html,.

M A X 4051/A , M A X 4052/A , M A X 4053/A

Low-Voltage, CMOS Analog Multiplexers/Switches 2_______________________________________________________________________________________

ABSOLUTE MAXIMUM RATINGS

ELECTRICAL CHARACTERISTICS—Dual Supplies

(V+ = +4.5V to +5.5V, V- = -4.5V to -5.5V, T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25°C.)

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Voltages Referenced to GND

V+........................................................................-0.3V to +17V V-..........................................................................+0.3V to -17V V+ to V-................................................................-0.3V to +17V Voltage into Any Terminal (Note 1)..........(V- - 2V) to (V+ + 2V)

or 30mA (whichever occurs first)

Continuous Current into Any Terminal..............................±30mA Peak Current, NO or COM

(pulsed at 1ms, 10% duty cycle).................................±100mA

Continuous Power Dissipation (T A = +70°C)

Plastic DIP (derate 10.53mW/°C above +70°C)............842mW Narrow SO (derate 8.70mW/°C above +70°C)..............696mW QSOP (derate 8.00mW/°C above +70°C).....................640mW CERDIP (derate 10.00mW/°C above +70°C)................800mW Operating Temperature Ranges

MAX405_C_ E/MAX405_AC_E.............................0°C to +70°C MAX405_E_ E/MAX405_AE_E...........................-40°C to +85°C MAX405_MJE/MAX405_AMJE........................-55°C to +125°C Storage Temperature Range.............................-65°C to +150°C Lead Temperature (soldering, 10s).................................+300°C

Note 1:Signals on any terminal exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maximum

current rating.

ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)

MAX4051/A, MAX4052/A, MAX4053/A Low-Voltage, CMOS Analog Multiplexers/Switches

(V+ = +4.5V to +5.5V, V- = -4.5V to -5.5V, T A= T MIN to T MAX, unless otherwise noted. Typical values are at T A= +25°C.)

M A X 4051/A , M A X 4052/A , M A X 4053/A

Low-Voltage, CMOS Analog Multiplexers/Switches 4_______________________________________________________________________________________

Note 2:The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.Note 3:?R ON = R ON(MAX)- R ON(MIN).

Note 4:Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the

specified analog signal ranges; i.e., V NO = 3V to 0V and 0V to -3V.

Note 5:Leakage parameters are 100% tested at maximum-rated hot operating temperature, and guaranteed by correlation at

T A = +25°C.

Note 6:Guaranteed by design, not production tested.

ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)

(V+ = +4.5V to +5.5V, V- = -4.5V to -5.5V, T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25°C.)

ELECTRICAL CHARACTERISTICS—Single +5V Supply

MAX4051/A, MAX4052/A, MAX4053/A Low-Voltage, CMOS Analog Multiplexers/Switches

(V+ = +4.5V to +5.5V, V- = 0V, T A= T MIN to T MAX, unless otherwise noted. Typical values are at T A= +25°C.)

M A X 4051/A , M A X 4052/A , M A X 4053/A

Low-Voltage, CMOS Analog Multiplexers/Switches 6_______________________________________________________________________________________

ELECTRICAL CHARACTERISTICS—Single +5V Supply (continued)

(V+ = +4.5V to +5.5V, V- = 0V, T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25°C.)

Note 2:The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.Note 3:?R ON = R ON(MAX)- R ON(MIN).

Note 4:Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the

specified analog signal ranges; i.e., V NO = 3V to 0V and 0V to -3V.

Note 5:Leakage parameters are 100% tested at maximum-rated hot operating temperature, and guaranteed by correlation at

T A = +25°C.

Note 6:Guaranteed by design, not production tested.

ELECTRICAL CHARACTERISTICS—Single +3V Supply

MAX4051/A, MAX4052/A, MAX4053/A Low-Voltage, CMOS Analog Multiplexers/Switches

(V+ = +3.0V to +3.6V, V- = 0V, T A= T MIN to T MAX, unless otherwise noted. Typical values are at T A= +25°C.)

M A X 4051/A , M A X 4052/A , M A X 4053/A

Low-Voltage, CMOS Analog Multiplexers/Switches 8_______________________________________________________________________________________

ELECTRICAL CHARACTERISTICS—Single +3V Supply (continued)

(V+ = +3.0V to +3.6V, V- = 0V, T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25°C.)

Note 2:The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.Note 3:?R ON = R ON(MAX)- R ON(MIN).

Note 4:Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the

specified analog signal ranges; i.e., V NO = 3V to 0V and 0V to -3V.

Note 5:Leakage parameters are 100% tested at maximum-rated hot operating temperature, and guaranteed by correlation at

T A = +25°C.

Note 6:Guaranteed by design, not production tested.

MAX4051/A, MAX4052/A, MAX4053/A

Low-Voltage, CMOS Analog

Multiplexers/Switches

_______________________________________________________________________________________9

11030

-5-31

ON-RESISTANCE vs. V COM

(DUAL SUPPLIES)

5090

V COM (V)

R O N (?)

-1

701004080605

-40

-22

11030

-5-31ON-RESISTANCE vs. V COM

AND TEMPERATURE (DUAL SUPPLIES)

5090

V COM (V)R O N (?)

-137********

605-40-224

300

02ON-RESISTANCE vs. V COM

(SINGLE SUPPLY)

100200V COM (V)

R O N (?)

4150250275225

7517512515

31800

ON-RESISTANCE vs. V COM

AND TEMPERATURE (SINGLE SUPPLY)

100V COM (V)

R O N (?)

601401601208040

-5-31

CHARGE INJECTION vs. V COM

-5

5V COM (V)

Q j (p C )

-1

-40

-22

0.1

OFF-LEAKAGE vs.TEMPERATURE

1000

TEMPERATURE (°C)

O F F -L E A K A G E (p A )

100-50

125

25-25

07550100

0.1

ON-LEAKAGE vs.TEMPERATURE

100010,000TEMPERATURE (°C)

O N -L E A K A G E (p A )

101

100

-50

125

25-25

07550100

0.1

SUPPLY CURRENT vs.TEMPERATURE

TEMPERATURE (°C)

I +, I - (n A )

-50

125

25-25

07550100

__________________________________________Typical Operating Characteristics

(V+ = +5V, V- = -5V, GND = 0V, T A = +25°C, unless otherwise noted.)

M A X 4051/A , M A X 4052/A , M A X 4053/A

Low-Voltage, CMOS Analog Multiplexers/Switches 10

______________________________________________________________________________________

____________________________Typical Operating Characteristics (continued)

(V+ = +5V, V- = -5V, GND = 0V, T A = +25°C, unless otherwise noted.)

_____________________________________________________________Pin Descriptions

67————

31, 2, 4, 5

——Note:NO, NC, and COM pins are identical and interchangeable. Any may be considered an input or output; signals pass equally

well in both directions.67123515NO0B–NO3B ———MAX4052/MAX4052A

MAX4053/MAX4053A

0.01

100

10k

TOTAL HARMONIC DISTORTION

vs. FREQUENCY

0.1

FREQUENCY (Hz)

T H D (%)

10100

0-10-90

0.01

0.1

10100300

FREQUENCY RESPONSE

-80-70FREQUENCY (MHz)

L O S S (d B )P H A S E (D E G R E E S )

-50-60-40-20-305

0-40

-35-30-20-25-15-5-10

INSERTION LOSS

50? IN/OUT OFF-ISOLATION

ON PHASE

__________Applications Information

Power-Supply Considerations

Overview

The MAX4051/MAX4052/MAX4053 and MAX4051A/MAX4052A/MAX4053A construction is typical of most CMOS analog switches. They have three supply pins:V+, V-, and GND. V+ and V- are used to drive the inter-nal CMOS switches and set the limits of the analog volt-age on any switch. Reverse ESD-protection diodes are internally connected between each analog signal pin and both V+ and V-. If any analog signal exceeds V+ or V-, one of these diodes will conduct. During normal operation, these (and other) reverse-biased ESD diodes leak, forming the only current drawn from V+ or V-.

Virtually all the analog leakage current comes from the ESD diodes. Although the ESD diodes on a given signal pin are identical, and therefore fairly well balanced,they are reverse biased differently. Each is biased by either V+ or V- and the analog signal. This means their leakages will vary as the signal varies. The difference in the two diode leakages to the V+ and V- pins consti-tutes the analog signal path leakage current. All analog leakage current flows between each pin and one of the supply terminals, not to the other switch terminal. This is why both sides of a given switch can show leakage cur-rents of either the same or opposite polarity.

There is no connection between the analog signal paths and GND.

MAX4051/A, MAX4052/A, MAX4053/A

Low-Voltage, CMOS Analog

Multiplexers/Switches

______________________________________________________________________________________11

Table 1. Truth Table/Switch Programming

X = Don’t care * ADDC not present on MAX4052.

Note:NO and COM pins are identical and interchangeable. Either may be considered an input or output; signals pass equally well

in either direction.

M A X 4051/A , M A X 4052/A , M A X 4053/A

V+ and G ND power the internal logic and logic-level translators, and set both the input and output logic lim-its. The logic-level translators convert the logic levels into switched V+ and V- signals to drive the gates of the analog signals. This drive signal is the only connec-tion between the logic supplies (and signals) and the analog supplies. V+ and V- have ESD-protection diodes to GND.

The logic-level thresholds are TTL/CMOS compatible when V+ is +5V. As V+ rises, the threshold increases slightly, so when V+ reaches +12V, the threshold is about 3.1V; above the TTL-guaranteed high-level mini-mum of 2.8V, but still compatible with CMOS outputs.Bipolar Supplies

These devices operate with bipolar supplies between ±3.0V and ±8V. The V+ and V- supplies need not be symmetrical, but their sum cannot exceed the absolute maximum rating of +17V.

Single Supply

These devices operate from a single supply between +3V and +16V when V- is connected to GND. All of the bipolar precautions must be observed. At room temper-ature, they actually “work” with a single supply at near or below +1.7V, although as supply voltage decreases,switch on-resistance and switching times become very high.

Overvoltage Protection

Proper power-supply sequencing is recommended for all CMOS devices. Do not exceed the absolute maxi-mum ratings, because stresses beyond the listed rat-ings can cause permanent damage to the devices.Always sequence V+ on first, then V-, followed by the logic inputs (NO) and by COM. If power-supply sequencing is not possible, add two small signal diodes (D1, D2) in series with the supply pins for overvoltage protection (Figure 1).

Adding diodes reduces the analog signal range to one diode drop below V+ and one diode drop above V-, but does not affect the devices’ low switch resistance and low leakage characteristics. Device operation is unchanged, and the difference between V+ and V-should not exceed 17V. These protection diodes are not recommended when using a single supply if signal levels must extend to ground.

High-Frequency Performance

In 50?systems, signal response is reasonably flat up to 50MHz (see Typical Operating Characteristics ).Above 20MHz, the on response has several minor peaks which are highly layout dependent. The problem is not turning the switch on, but turning it off. The off-state switch acts like a capacitor, and passes higher frequencies with less attenuation. At 10MHz, off isola-tion is about -45dB in 50?systems, becoming worse (approximately 20dB per decade) as frequency increases. Higher circuit impedances also make off iso-lation worse. Adjacent channel attenuation is about 3dB above that of a bare IC socket, and is entirely due to capacitive coupling.

Low-Voltage, CMOS Analog Multiplexers/Switches 12______________________________________________________________________________________

Figure 1. Overvoltage Protection Using External Blocking Diodes

MAX4051/A, MAX4052/A, MAX4053/A

Low-Voltage, CMOS Analog

Multiplexers/Switches

______________________________________________________________________________________13

Figure 2. Address Transition Time

______________________________________________Test Circuits/Timing Diagrams

Figure 3. Enable Switching Time

M A X 4051/A , M A X 4052/A , M A X 4053/A

Low-Voltage, CMOS Analog Multiplexers/Switches 14______________________________________________________________________________________

MAX4051/A, MAX4052/A, MAX4053/A

Low-Voltage, CMOS Analog

Multiplexers/Switches

______________________________________________________________________________________

Figure 4. Break-Before-Make Interval

Figure 5. Charge Injection

M A X 4051/A , M A X 4052/A , M A X 4053/A

Low-Voltage, CMOS Analog Multiplexers/Switches 16

______________________________________________________________________________________

Figure 6. Off-Isolation, On-Loss, and Crosstalk

Figure 7. NO/COM Capacitance

MAX4051/A, MAX4052/A, MAX4053/A

Low-Voltage, CMOS Analog

Multiplexers/Switches

______________________________________________________________________________________17

Chip Information

TRANSISTOR COUNT: 161

SUBSTRATE CONNECTED TO V+.

___________________________________________Ordering Information (continued)

M A X 4051/A , M A X 4052/A , M A X 4053/A

Low-Voltage, CMOS Analog Multiplexers/Switches

Package Information

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to https://www.sodocs.net/doc/ba14686102.html,/packages .)

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.

Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600___________________19?2005 Maxim Integrated Products

Printed USA

is a registered trademark of Maxim Integrated Products.

Package Information (continued)

(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to https://www.sodocs.net/doc/ba14686102.html,/packages .)

MAX4051/A, MAX4052/A, MAX4053/A

Low-Voltage, CMOS Analog

Multiplexers/Switches

MAX4051AESE+T中文资料

相关文档

最新文档