solaris11网络基本操作

?设置IP地址：
root@solaris:~# ipadm create-ip net0
root@solaris:~# dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
net0 Ethernet up 1000 full e1000g0
root@solaris:~# ipadm show-if
IFNAME CLASS STATE ACTIVE OVER
lo0 loopback ok yes ---
net0 ip down no ---
root@solaris:~# ipadm create-addr -T static -a 192.168.109.5/24 net0
root@solaris:~# ipadm show-if
IFNAME CLASS STATE ACTIVE OVER
lo0 loopback ok yes ---
net0 ip ok yes ---
root@solaris:~# ipadm show-addr
ADDROBJ TYPE STATIC ADDR
lo0/v4 static ok 127.0.0.1/8
net0/v4 static ok 192.168.109.5/24
lo0/v6 static ok ::1/128
在同一个网卡上添加第二地址并删除
root@solaris11-2:~# ipadm create-addr -T static -a 192.168.109.6 net0
root@solaris11-2:~# ipadm
NAME CLASS/TYPE STATE UNDER ADDR
lo0 loopback ok -- --
lo0/v4 static ok -- 127.0.0.1/8
net0 ip ok -- --
net0/v4 static ok -- 192.168.109.5/24
net0/v4a static ok -- 192.168.109.6/24
root@solaris11-2:~# ipadm delete-addr net0/v4a
root@solaris11-2:~# ipadm
NAME CLASS/TYPE STATE UNDER ADDR
lo0 loopback ok -- --
lo0/v4 static ok -- 127.0.0.1/8
net0 ip ok -- --
net0/v4 static ok -- 192.168.109.5/24


设置主机名：
root@solaris11-2:~# svccfg -s svc:/system/identity:node setprop config/nodename = astring: test
root@solaris11-2:~# svcadm refresh svc:/system/identity:node
root@solaris11-2:~# svcadm restart identity:node
这三个命令改变了系统的主机名test，但是不会自动更改/etc/hosts文件，注意手动修改
ipmp probe模式
要仅使用probe探测，请执行以下步骤：缺省情况下此参数为“false”，probe和link模式同时支持
# svccfg -s svc:/network/ipmp setprop config/transitive-probing=true
# svcadm refresh svc:/network/ipmp:default
ipadm create-ip net0
ipadm create-ip net1
ipadm create-addr -T static -a ip0 net0
ipadm create-addr -T static -a ip1 net1
ipadm create-ipmp ipmp0
ipadm add-ipmp -i net0 net1 ipmp0
ipadm create-addr -a ip ipmp0
ipmpstat -g
ipmpstat -a
ipmpstat -i
ipmp link模式
如果要使用link模式，只要删除两个底层网卡的ip地址即可，或者一开始就不配地址
# ipadm delete-addr net0/v4
# ipadm delete-addr net1/v4
# ipadm
NAME CLASS/TYPE STATE UNDER ADDR
ipmp1 ipmp ok -- --
ipmp1/v4 static ok -- 192.168.109.10/24
lo0

loopback ok -- --
lo0/v4 static ok -- 127.0.0.1/8
net0 ip ok ipmp1 --
net1 ip ok ipmp1 --
# ipmpstat -g
GROUP GROUPNAME STATE FDT INTERFACES
ipmp1 ipmp1 ok -- net1 net0
# ipmpstat -i
INTERFACE ACTIVE GROUP FLAGS LINK PROBE STATE
net1 yes ipmp1 ------- up disabled ok
net0 yes ipmp1 --mbM-- up disabled ok
# ipmpstat -a
ADDRESS STATE GROUP INBOUND OUTBOUND
:: down ipmp1 -- --
192.168.109.10 up ipmp1 net0 net1 net0
删除ipmp
# ipadm remove-ipmp -i net0 -i net1 ipmp1
# ipadm delete-ipmp ipmp1